Daily Papers

Reinforcement learning systems rely on environment interfaces that specify observations and reward functions, yet constructing these interfaces for new tasks often requires substantial manual effort. While recent work has automated reward design using large language models (LLMs), these approaches assume fixed observations and do not address the broader challenge of synthesizing complete task interfaces. We study RL task interface discovery from raw simulator state, where both observation mappings and reward functions must be generated. We propose LIMEN (Code available at https://github.com/Lossfunk/LIMEN), a LLM guided evolutionary framework that produces candidate interfaces as executable programs and iteratively refines them using policy training feedback. Across novel discrete gridworld tasks and continuous control domains spanning locomotion and manipulation, joint evolution of observations and rewards discovers effective interfaces given only a trajectory-level success metric, while optimizing either component alone fails on at least one domain. These results demonstrate that automatic construction of RL interfaces from raw state can substantially reduce manual engineering and that observation and reward components often benefit from co-design, as single-component optimization fails catastrophically on at least one domain in our evaluation suite.

Crash datasets that carry an investigator narrative hold information the coded fields omit. Coding those narratives at scale has been blocked by three obstacles. Frontier large language models are costly at that scale, their generated text cannot be verified, and no rule says how much output a human must check. This paper formulates narrative coding as gated, typed decisions answered by Jev, a System One model that returns probabilities over analyst-defined options and generates no text. A screen covered 499,500 Texas narratives and 195,857 were coded with a 27-question schema. Cost is governed by schema size rather than narrative length. The probabilities are audited against coded fields and against 2,416 blinded human judgments drawn under a stated sampling design. Two frontier large language models are benchmarked on the same records. Against human labels the typed model attains an F1 of 0.908. One frontier model gains 0.059 and the other is indistinguishable from it. Calibration varies by model rather than by paradigm, so each model must be audited. Recalibration on the same labels reduces calibration error by a factor of 3.3. Agreement with coded fields understates fidelity to the narrative by a median of 0.26 in kappa. A resolution-floor bound covers any model that reports probabilities on a discrete grid. A review budget over flagged records gives the records a human must read per variable and per year. Adding the calibrated variables to the coded fields raises the injury and fatal crashes attributed to nine factors by 10,747 per year.

To leverage LLMs for visual synthesis, traditional methods convert raster image information into discrete grid tokens through specialized visual modules, while disrupting the model's ability to capture the true semantic representation of visual scenes. This paper posits that an alternative representation of images, vector graphics, can effectively surmount this limitation by enabling a more natural and semantically coherent segmentation of the image information. Thus, we introduce StrokeNUWA, a pioneering work exploring a better visual representation ''stroke tokens'' on vector graphics, which is inherently visual semantics rich, naturally compatible with LLMs, and highly compressed. Equipped with stroke tokens, StrokeNUWA can significantly surpass traditional LLM-based and optimization-based methods across various metrics in the vector graphic generation task. Besides, StrokeNUWA achieves up to a 94x speedup in inference over the speed of prior methods with an exceptional SVG code compression ratio of 6.9%.

Natural images are continuous, yet most generative models synthesize them on discrete grids, limiting resolution-flexible generation. Continuous neural fields enable resolution-free rendering, but prior methods introduce continuity only at the decoding stage as an interpolation module, leaving the generative latent space discretized and reconstruction-oriented. We propose RaPD (Resolution-agnostic Pixel Diffusion), which performs diffusion in a continuous Neural Image Field (NIF) latent space. RaPD bridges this reconstruction-generation gap with Semantic Representation Guidance for generation-aware latent learning and a Coordinate-Queried Attention Renderer for coordinate-conditioned, scale-aware rendering. A single denoised latent can be rendered at arbitrary resolutions by changing only the query coordinates, keeping diffusion cost fixed. Experiments demonstrate superior generation quality and resolution scalability.

Representing visual signals by coordinate-based deep fully-connected networks has been shown advantageous in fitting complex details and solving inverse problems than discrete grid-based representation. However, acquiring such a continuous Implicit Neural Representation (INR) requires tedious per-scene training on tons of signal measurements, which limits its practicality. In this paper, we present a generic INR framework that achieves both data and training efficiency by learning a Neural Implicit Dictionary (NID) from a data collection and representing INR as a functional combination of basis sampled from the dictionary. Our NID assembles a group of coordinate-based subnetworks which are tuned to span the desired function space. After training, one can instantly and robustly acquire an unseen scene representation by solving the coding coefficients. To parallelly optimize a large group of networks, we borrow the idea from Mixture-of-Expert (MoE) to design and train our network with a sparse gating mechanism. Our experiments show that, NID can improve reconstruction of 2D images or 3D scenes by 2 orders of magnitude faster with up to 98% less input data. We further demonstrate various applications of NID in image inpainting and occlusion removal, which are considered to be challenging with vanilla INR. Our codes are available in https://github.com/VITA-Group/Neural-Implicit-Dict.

Audio-visual navigation enables embodied agents to navigate toward sound-emitting targets by leveraging both auditory and visual cues. However, most existing approaches rely on precomputed room impulse responses (RIRs) for binaural audio rendering, restricting agents to discrete grid positions and leading to spatially discontinuous observations. To establish a more realistic setting, we introduce Semantic Audio-Visual Navigation in Continuous Environments (SAVN-CE), where agents can move freely in 3D spaces and perceive temporally and spatially coherent audio-visual streams. In this setting, targets may intermittently become silent or stop emitting sound entirely, causing agents to lose goal information. To tackle this challenge, we propose MAGNet, a multimodal transformer-based model that jointly encodes spatial and semantic goal representations and integrates historical context with self-motion cues to enable memory-augmented goal reasoning. Comprehensive experiments demonstrate that MAGNet significantly outperforms state-of-the-art methods, achieving up to a 12.1\% absolute improvement in success rate. These results also highlight its robustness to short-duration sounds and long-distance navigation scenarios. The code is available at https://github.com/yichenzeng24/SAVN-CE.

Weight quantization has become a standard tool for efficient LLM deployment, especially for local inference, where models are now routinely served at 2-3 bits per parameter. The state of the art is currently split into two sets of methods: simple scalar quantization techniques, such as GPTQ or AWQ, which are widely deployed but plateau in accuracy at 3-4 bits per parameter (bpp), and "second-generation" vector- or trellis-quantized methods, such as QTIP, GPTVQ and AQLM, which push the accuracy frontier at low bit-widths but are notoriously hard to implement and to scale, and have gained relatively less traction. In this paper, we ask whether this gap is fundamental, or whether a carefully optimized scalar quantizer can recover most of it. We answer in the affirmative, by introducing GSQ (Gumbel-Softmax Quantization), a post-training scalar quantization method which jointly learns the per-coordinate grid assignments and the per-group scales using a Gumbel-Softmax relaxation of the discrete grid. GSQ matches the cardinality of the relaxation to the small number of levels available in the target bit-width regime (e.g., 3-8 levels for ternary and 3 bpp, respectively), making the relaxation tight and the optimization tractable. Practically, on the standard Llama-3.1-8B/70B-Instruct models, GSQ closes most of the gap between scalar quantization and the QTIP frontier at 2 and 3 bits, while using a symmetric scalar grid with group-wise quantization, and thus fully compatible with existing scalar inference kernels. We further show that GSQ scales to trillion-scale Mixture-of-Experts models such as Kimi-K2.5, where vector-quantized methods are difficult to apply.

The demand for high-quality medical imaging in clinical practice and assisted diagnosis has made 3D image reconstruction in radiological imaging a key research focus. Artificial intelligence (AI) has emerged as a promising approach for improving reconstruction accuracy while reducing acquisition and processing time, thereby minimizing patient radiation exposure and discomfort and ultimately benefiting clinical diagnosis. This review surveys state-of-the-art AI-based 3D reconstruction algorithms in radiological imaging and organizes them into four representation families according to how the reconstructed target is parameterized: discrete grid representations, explicit basis expansion representations, explicit primitive representations, and implicit neural representations. In particular, the review clarifies the relationships among these representation forms and highlights radiance field methods as a specialized subtype of implicit neural representation. In addition, we summarize commonly used evaluation metrics and benchmark datasets for radiological image reconstruction. Finally, we discuss the current state of development, major challenges, and future research directions in this rapidly evolving field. Our project is available at: https://github.com/Bean-Young/AI4Radiology.

Post-training quantization (PTQ) is widely used to reduce the memory and computational cost of large language models. Existing PTQ methods typically obtain an initial quantized model through heuristic rules or greedy optimization, and once quantization is completed the resulting integer assignments are usually treated as final. This observation motivates a complementary optimization stage within PTQ that keeps quantized weights improvable after an executable quantized model has been produced, while preserving the quantized format. We introduce ReQuant, a backpropagation-free fixed-grid refinement procedure for this stage. Agnostic to the PTQ initializer, ReQuant takes an existing quantized model as a feasible starting point and iteratively revisits its discrete weight assignments on the fixed quantization grid. Accepted updates strictly reduce the mean squared reconstruction error and remain on the original grid. In this way, ReQuant turns the initially fixed PTQ output into an iteratively optimizable discrete solution and serves as a plug-and-play post-processing stage for existing PTQ pipelines. Experiments across diverse model families, bit-widths, and downstream tasks show that ReQuant consistently improves quantized models from heterogeneous PTQ initializers, with especially large gains on simple initializers and lower bit-widths. Notably, ReQuant can refine a simple round-to-nearest initialization across multiple sweeps until it approaches or surpasses GPTAQ under the same quantization format. These results establish ReQuant as a practical complementary stage for further improving existing PTQ pipelines.

While surface-based view synthesis algorithms are appealing due to their low computational requirements, they often struggle to reproduce thin structures. In contrast, more expensive methods that model the scene's geometry as a volumetric density field (e.g. NeRF) excel at reconstructing fine geometric detail. However, density fields often represent geometry in a "fuzzy" manner, which hinders exact localization of the surface. In this work, we modify density fields to encourage them to converge towards surfaces, without compromising their ability to reconstruct thin structures. First, we employ a discrete opacity grid representation instead of a continuous density field, which allows opacity values to discontinuously transition from zero to one at the surface. Second, we anti-alias by casting multiple rays per pixel, which allows occlusion boundaries and subpixel structures to be modelled without using semi-transparent voxels. Third, we minimize the binary entropy of the opacity values, which facilitates the extraction of surface geometry by encouraging opacity values to binarize towards the end of training. Lastly, we develop a fusion-based meshing strategy followed by mesh simplification and appearance model fitting. The compact meshes produced by our model can be rendered in real-time on mobile devices and achieve significantly higher view synthesis quality compared to existing mesh-based approaches.

Most recent advances in 3D generative modeling rely on diffusion or flow-matching formulations. We instead explore a fully autoregressive alternative and introduce GaussianGPT, a transformer-based model that directly generates 3D Gaussians via next-token prediction, thus facilitating full 3D scene generation. We first compress Gaussian primitives into a discrete latent grid using a sparse 3D convolutional autoencoder with vector quantization. The resulting tokens are serialized and modeled using a causal transformer with 3D rotary positional embedding, enabling sequential generation of spatial structure and appearance. Unlike diffusion-based methods that refine scenes holistically, our formulation constructs scenes step-by-step, naturally supporting completion, outpainting, controllable sampling via temperature, and flexible generation horizons. This formulation leverages the compositional inductive biases and scalability of autoregressive modeling while operating on explicit representations compatible with modern neural rendering pipelines, positioning autoregressive transformers as a complementary paradigm for controllable and context-aware 3D generation.

Existing depth estimation methods are fundamentally limited to predicting depth on discrete image grids. Such representations restrict their scalability to arbitrary output resolutions and hinder the geometric detail recovery. This paper introduces InfiniDepth, which represents depth as neural implicit fields. Through a simple yet effective local implicit decoder, we can query depth at continuous 2D coordinates, enabling arbitrary-resolution and fine-grained depth estimation. To better assess our method's capabilities, we curate a high-quality 4K synthetic benchmark from five different games, spanning diverse scenes with rich geometric and appearance details. Extensive experiments demonstrate that InfiniDepth achieves state-of-the-art performance on both synthetic and real-world benchmarks across relative and metric depth estimation tasks, particularly excelling in fine-detail regions. It also benefits the task of novel view synthesis under large viewpoint shifts, producing high-quality results with fewer holes and artifacts.

3D semantic scene understanding is a fundamental challenge in computer vision. It enables mobile agents to autonomously plan and navigate arbitrary environments. SSC formalizes this challenge as jointly estimating dense geometry and semantic information from sparse observations of a scene. Current methods for SSC are generally trained on 3D ground truth based on aggregated LiDAR scans. This process relies on special sensors and annotation by hand which are costly and do not scale well. To overcome this issue, our work presents the first self-supervised approach to SSC called S4C that does not rely on 3D ground truth data. Our proposed method can reconstruct a scene from a single image and only relies on videos and pseudo segmentation ground truth generated from off-the-shelf image segmentation network during training. Unlike existing methods, which use discrete voxel grids, we represent scenes as implicit semantic fields. This formulation allows querying any point within the camera frustum for occupancy and semantic class. Our architecture is trained through rendering-based self-supervised losses. Nonetheless, our method achieves performance close to fully supervised state-of-the-art methods. Additionally, our method demonstrates strong generalization capabilities and can synthesize accurate segmentation maps for far away viewpoints.

Planning the layout of bicycle-sharing stations is a complex process, especially in cities where bicycle sharing systems are just being implemented. Urban planners often have to make a lot of estimates based on both publicly available data and privately provided data from the administration and then use the Location-Allocation model popular in the field. Many municipalities in smaller cities may have difficulty hiring specialists to carry out such planning. This thesis proposes a new solution to streamline and facilitate the process of such planning by using spatial embedding methods. Based only on publicly available data from OpenStreetMap, and station layouts from 34 cities in Europe, a method has been developed to divide cities into micro-regions using the Uber H3 discrete global grid system and to indicate regions where it is worth placing a station based on existing systems in different cities using transfer learning. The result of the work is a mechanism to support planners in their decision making when planning a station layout with a choice of reference cities.

With the advent of deep neural networks, learning-based approaches for 3D reconstruction have gained popularity. However, unlike for images, in 3D there is no canonical representation which is both computationally and memory efficient yet allows for representing high-resolution geometry of arbitrary topology. Many of the state-of-the-art learning-based 3D reconstruction approaches can hence only represent very coarse 3D geometry or are limited to a restricted domain. In this paper, we propose Occupancy Networks, a new representation for learning-based 3D reconstruction methods. Occupancy networks implicitly represent the 3D surface as the continuous decision boundary of a deep neural network classifier. In contrast to existing approaches, our representation encodes a description of the 3D output at infinite resolution without excessive memory footprint. We validate that our representation can efficiently encode 3D structure and can be inferred from various kinds of input. Our experiments demonstrate competitive results, both qualitatively and quantitatively, for the challenging tasks of 3D reconstruction from single images, noisy point clouds and coarse discrete voxel grids. We believe that occupancy networks will become a useful tool in a wide variety of learning-based 3D tasks.

Neural fields, which represent signals as a function parameterized by a neural network, are a promising alternative to traditional discrete vector or grid-based representations. Compared to discrete representations, neural representations both scale well with increasing resolution, are continuous, and can be many-times differentiable. However, given a dataset of signals that we would like to represent, having to optimize a separate neural field for each signal is inefficient, and cannot capitalize on shared information or structures among signals. Existing generalization methods view this as a meta-learning problem and employ gradient-based meta-learning to learn an initialization which is then fine-tuned with test-time optimization, or learn hypernetworks to produce the weights of a neural field. We instead propose a new paradigm that views the large-scale training of neural representations as a part of a partially-observed neural process framework, and leverage neural process algorithms to solve this task. We demonstrate that this approach outperforms both state-of-the-art gradient-based meta-learning approaches and hypernetwork approaches.

Spatial instructions describe how to move objects, transform regions, or modify their surroundings. When several operations are applied in sequence, each acts on a configuration shaped by earlier changes. How accurately can large language models (LLMs) predict the resulting spatial state? We introduce Grid-Bench, an executable benchmark in which eight families of operations transform discrete worlds represented as two-, three-, and four-dimensional grids. Given an initial grid, explicit rules, and an event history expressed as text, a model predicts the complete final grid. Reference execution makes every predicted value checkable, supporting comparisons across spatial operations, history lengths, and workloads. Evaluating six LLMs shows that complete-state accuracy falls sharply as histories grow, with substantial divergence among models that perform similarly on single events. Models with similar exact-match accuracy can nevertheless differ substantially in the number of incorrect cells on shared instances. Even over long histories, some models recover many correct changes beyond what copying the initial state would yield. Grid-Bench makes both complete recovery and these differences in returned states directly measurable across a range of spatial conditions.

Implicit neural networks have emerged as a crucial technology in 3D surface reconstruction. To reconstruct continuous surfaces from discrete point clouds, encoding the input points into regular grid features (plane or volume) has been commonly employed in existing approaches. However, these methods typically use the grid as an index for uniformly scattering point features. Compared with the irregular point features, the regular grid features may sacrifice some reconstruction details but improve efficiency. To take full advantage of these two types of features, we introduce a novel and high-efficiency attention mechanism between the grid and point features named Point-Grid Transformer (GridFormer). This mechanism treats the grid as a transfer point connecting the space and point cloud. Our method maximizes the spatial expressiveness of grid features and maintains computational efficiency. Furthermore, optimizing predictions over the entire space could potentially result in blurred boundaries. To address this issue, we further propose a boundary optimization strategy incorporating margin binary cross-entropy loss and boundary sampling. This approach enables us to achieve a more precise representation of the object structure. Our experiments validate that our method is effective and outperforms the state-of-the-art approaches under widely used benchmarks by producing more precise geometry reconstructions. The code is available at https://github.com/list17/GridFormer.

Learning implicit representations has been a widely used solution for surface reconstruction from 3D point clouds. The latest methods infer a distance or occupancy field by overfitting a neural network on a single point cloud. However, these methods suffer from a slow inference due to the slow convergence of neural networks and the extensive calculation of distances to surface points, which limits them to small scale points. To resolve the scalability issue in surface reconstruction, we propose GridPull to improve the efficiency of learning implicit representations from large scale point clouds. Our novelty lies in the fast inference of a discrete distance field defined on grids without using any neural components. To remedy the lack of continuousness brought by neural networks, we introduce a loss function to encourage continuous distances and consistent gradients in the field during pulling queries onto the surface in grids near to the surface. We use uniform grids for a fast grid search to localize sampled queries, and organize surface points in a tree structure to speed up the calculation of distances to the surface. We do not rely on learning priors or normal supervision during optimization, and achieve superiority over the latest methods in terms of complexity and accuracy. We evaluate our method on shape and scene benchmarks, and report numerical and visual comparisons with the latest methods to justify our effectiveness and superiority. The code is available at https://github.com/chenchao15/GridPull.

Vision-and-language navigation (VLN) enables the agent to navigate to a remote location following the natural language instruction in 3D environments. To represent the previously visited environment, most approaches for VLN implement memory using recurrent states, topological maps, or top-down semantic maps. In contrast to these approaches, we build the top-down egocentric and dynamically growing Grid Memory Map (i.e., GridMM) to structure the visited environment. From a global perspective, historical observations are projected into a unified grid map in a top-down view, which can better represent the spatial relations of the environment. From a local perspective, we further propose an instruction relevance aggregation method to capture fine-grained visual clues in each grid region. Extensive experiments are conducted on both the REVERIE, R2R, SOON datasets in the discrete environments, and the R2R-CE dataset in the continuous environments, showing the superiority of our proposed method.

Semantic cell annotation improves chunking interpretability for spreadsheets in LLM-driven RAG systems, aiding answer generation through enriched context rather than improved retrieval accuracy. We propose a novel framework of splitting any spreadsheet into interpretable chunks using cell role annotation. Our framework beats the state of the art, yet it faces a hard ceiling. Spreadsheets are fundamentally two-dimensional unstructured data with continuous relationships and infinite potential cell roles. Because classification models are restricted to finite, pre-defined classes, they cannot perfectly capture this structural nuance, even with human-level annotation. We show that addressing the spreadsheet-to-LLM bottleneck requires moving beyond discrete cell classification. Instead, the field must develop dimensionality-reduction techniques to directly flatten 2D unstructured spreadsheets into 1D unstructured text. Text chunks would be easier for downstream RAG to interpret and generate from.

The total variation (TV)-seminorm is considered for piecewise polynomial, globally discontinuous (DG) and continuous (CG) finite element functions on simplicial meshes. A novel, discrete variant (DTV) based on a nodal quadrature formula is defined. DTV has favorable properties, compared to the original TV-seminorm for finite element functions. These include a convenient dual representation in terms of the supremum over the space of Raviart--Thomas finite element functions, subject to a set of simple constraints. It can therefore be shown that a variety of algorithms for classical image reconstruction problems, including TV-L^2 and TV-L^1, can be implemented in low and higher-order finite element spaces with the same efficiency as their counterparts originally developed for images on Cartesian grids.

Amortized neural inverse design typically remains closed-world: component choices are fixed vocabulary tokens, coordinate grids are frozen at training time, and continuous variables are discretized into sequence tokens. Multilayer optical coatings are an industrially important instance, coupling material sequence, layer thickness and wavelength-dependent response. We present IrisFlow, a query-based, open-vocabulary flow-matching framework instantiated in coatings: the target reflectance/transmittance spectrum, wavelength grid, candidate-material optical constants and layer count are supplied at query time. Candidate materials enter as wavelength-aware optical tokens rather than learned identities; material sequences are sampled by discrete flow matching over the query's candidate bank, thicknesses by continuous flow matching without discretization. A single 136M-parameter model designs 2-100-layer stacks. Across a 224-task benchmark it reconstructs in-distribution targets faithfully and retains same-order accuracy on a 15-material held-out bank without retraining; it reconstructs bands up to 1100 nm beyond its training envelope, designs against analytic application specifications and outperforms an autoregressive baseline on that baseline's material library. With optical constants calibrated to our deposition process, IrisFlow designs four color-displaying coolers, fabricated by ion-assisted evaporation: the three chromatic devices reach a CIEDE2000 color error of 3.1-5.2 while retaining 93-95% solar near-infrared reflectance, demonstrating open-vocabulary design carried through to fabricated coatings.

Token-based video representation has emerged as a promising approach for enabling large language models (LLMs) to interpret video content. However, existing token reduction techniques, such as pruning and merging, often disrupt essential positional embeddings and rely on continuous visual tokens sampled from nearby pixels with similar spatial-temporal locations. By removing only a small fraction of tokens, these methods still produce relatively lengthy continuous sequences, which falls short of the extreme compression required to balance computational efficiency and token count in video LLMs. In this paper, we introduce the novel task of Extreme Short Token Reduction, which aims to represent entire videos using a minimal set of discrete tokens. We propose VQToken, a neural discrete token representation framework that (i) applies adaptive vector quantization to continuous ViT embeddings to learn a compact codebook and (ii) preserves spatial-temporal positions via a token hash function by assigning each grid-level token to its nearest codebook entry. On the Extreme Short Token Reduction task, our VQToken compresses sequences to just 0.07 percent of their original length while incurring only a 0.66 percent drop in accuracy on the NextQA-MC benchmark. It also achieves comparable performance on ActNet-QA, Long Video Bench, and VideoMME. We further introduce the Token Information Density (TokDense) metric and formalize fixed-length and adaptive-length subtasks, achieving state-of-the-art results in both settings. Our approach dramatically lowers theoretical complexity, increases information density, drastically reduces token counts, and enables efficient video LLMs in resource-constrained environments.

High frequency pedestrian motion forecasting when interacting with autonomous vehicles (AVs) can be enhanced through the use of behavioural frameworks, such as discrete choice models, that can explicitly account for correlation among similar movement alternatives. We formulate the pedestrian next step choice as a spatial discrete choice defined by a grid of speed adjustment and heading change. Using naturalistic pedestrian-AV encounters from nuScenes and Argoverse 2 (1 sec decision interval), we estimate a multinomial logit baseline and four spatial generalized extreme value (GEV) specifications (SCL, GSCL, SCNL, and GSCNL). We then compare them to a residual neural network logit (ResLogit) model that learns cross alternative effects while retaining an interpretable linear utility component. Across the evaluated data, spatial GEV structures yield only marginal improvements over multinomial logit, whereas ResLogit achieves a substantially better fit and produces behaviourally coherent errors concentrated among neighbouring grid cells. The results suggest that in dense, high frequency spatial choice sets, learning based residual corrections can capture proximity induced correlation more effectively than analyst specified GEV nesting structures, while maintaining interpretability.

Image tokenization plays a critical role in reducing the computational demands of modeling high-resolution images, significantly improving the efficiency of image and multimodal understanding and generation. Recent advances in 1D latent spaces have reduced the number of tokens required by eliminating the need for a 2D grid structure. In this paper, we further advance compact discrete image representation by introducing 1D binary image latents. By representing each image as a sequence of binary vectors, rather than using traditional one-hot codebook tokens, our approach preserves high-resolution details while maintaining the compactness of 1D latents. To the best of our knowledge, our text-to-image models are the first to achieve competitive performance in both diffusion and auto-regressive generation using just 128 discrete tokens for images up to 1024x1024, demonstrating up to a 32-fold reduction in token numbers compared to standard VQ-VAEs. The proposed 1D binary latent space, coupled with simple model architectures, achieves marked improvements in speed training and inference speed. Our text-to-image models allow for a global batch size of 4096 on a single GPU node with 8 AMD MI300X GPUs, and the training can be completed within 200 GPU days. Our models achieve competitive performance compared to modern image generation models without any in-house private training data or post-training refinements, offering a scalable and efficient alternative to conventional tokenization methods.

Weight-only post-training quantization (PTQ) enables the deployment of large language models under tight memory budgets, but accuracy often collapses at 2-3 bits. Existing backpropagation-free PTQ optimizers have two limitations: group decisions ignore the correction that the remaining continuous suffix can absorb, and discrete refinements typically keep the affine quantization grid fixed. We introduce SCHUROPT, which analytically eliminates the suffix's optimal continuous response, yielding an exact groupwise quadratic with Schur-complement curvature. It then alternates closed-form row-wise scale/zero-point refitting with coordinate descent over integer codes. With the GPTQ objective fixed, SCHUROPT improves mean zero-shot accuracy on 2-bit Qwen3-4B by 11.88 percentage points (pp). At higher precision, however, tighter reconstruction does not consistently improve end-model metrics. SCHURQUANT therefore combines SCHUROPT with quantized-prefix teacher reconstruction, reference-weight regularization, residual-add targets, and teacher-decision token weighting. Across eight Llama and Qwen models, SCHURQUANT achieves the highest mean zero-shot accuracy among the evaluated backpropagation free PTQ baselines, outperforming the strongest baseline by 9.65 pp at 2 bits.

We introduce a novel generative model, the Discrete Distribution Networks (DDN), that approximates data distribution using hierarchical discrete distributions. We posit that since the features within a network inherently capture distributional information, enabling the network to generate multiple samples simultaneously, rather than a single output, may offer an effective way to represent distributions. Therefore, DDN fits the target distribution, including continuous ones, by generating multiple discrete sample points. To capture finer details of the target data, DDN selects the output that is closest to the Ground Truth (GT) from the coarse results generated in the first layer. This selected output is then fed back into the network as a condition for the second layer, thereby generating new outputs more similar to the GT. As the number of DDN layers increases, the representational space of the outputs expands exponentially, and the generated samples become increasingly similar to the GT. This hierarchical output pattern of discrete distributions endows DDN with unique properties: more general zero-shot conditional generation and 1D latent representation. We demonstrate the efficacy of DDN and its intriguing properties through experiments on CIFAR-10 and FFHQ. The code is available at https://discrete-distribution-networks.github.io/

We develop a multi-rate distributed unscented Kalman filter for nonlinear networks without a fusion center. Local continuous-discrete UKFs run on a common base grid, update at their own sampling instants, and exchange estimates within one-hop neighborhoods. Under a windowed collective-detectability condition, diffusion of information matrices gives uniformly bounded quotient covariances although no individual node need be observable. When the collectively invisible subspace is trivial and the statistical-linearization discrepancies satisfy an explicit coherence bound, the information weighted fused mean yields exponentially bounded mean-square errors without a contraction-mixing condition. This contrasts with the arithmetic diffusiojn mean, which requires one. A distributed H_{infty} variant uses a fixed attenuation penalty. A finite-prefix feasibility check and the one-hop detectability Gramian yield a uniform regularized-information margin - an explicit local-contraction-mixing condition then yields mean-square error boundedness. The developed methods are tested on a stochastic nonlinear benchmark and a three-inertia network in which every node misses at least one mode. Information diffusion is more accurate than five-round covariance-averaging consensus at one fifth of its communication. It remains stable under 3:2 multi-rate sampling, where the covariance-averaging consensus and the diffusion mean both diverge, and it keeps the quotient covariances bounded.

The point cloud is gaining prominence as a method for representing 3D shapes, but its irregular format poses a challenge for deep learning methods. The common solution of transforming the data into a 3D voxel grid introduces its own challenges, mainly large memory size. In this paper we propose a novel 3D point cloud representation called 3D Modified Fisher Vectors (3DmFV). Our representation is hybrid as it combines the discrete structure of a grid with continuous generalization of Fisher vectors, in a compact and computationally efficient way. Using the grid enables us to design a new CNN architecture for point cloud classification and part segmentation. In a series of experiments we demonstrate competitive performance or even better than state-of-the-art on challenging benchmark datasets.

We present Channel-wise Vector Quantization (CVQ), a novel image tokenization paradigm that replaces patch-wise tokens with channel-wise tokens. Unlike conventional vector quantization, which assigns a discrete token to each patch feature vector, CVQ quantizes each channel of the feature map. This formulation represents an image as discrete levels of visual details, rather than as a grid of spatial patches. Based on CVQ, we introduce a new visual autoregressive framework with "next-channel prediction". Instead of rendering images patch by patch in raster order, our Channel-wise Autoregressive (CAR) model predicts image channels sequentially, producing progressively enriched visual details. Specifically, it first sketches global structure and then refines fine-grained attributes, akin to a human artist's workflow. Empirically, we show that: (1) CVQ achieves 100% codebook utilization with a 16K+ codebook size without any bells and whistles, and substantially improves reconstruction quality over conventional VQ; and (2) CAR attains a DPG score of 86.7 and a GenEval score of 0.79, demonstrating strong effectiveness for text-to-image generation.

Extending discrete-time causal Prior-data Fitted Networks for time series to continuous time invites writing the mechanism as a stochastic differential equation (SDE) -- but if the SDE is integrated once per observation gap, the trajectory law depends on when it is observed, and the prior remains a discrete-time Markov model in SDE clothing. We propose a precise continuity criterion -- trajectory-law invariance to the observation schedule -- together with a three-tier taxonomy (discrete; naive observation-grid integration; fine-grid integration with decoupled observation) and a construction realising the top tier on a random DAG with OU or small-MLP nonlinear drifts, irregular observation schedules, and hard / soft / time-varying interventions. A 2 times 2 encoder times integrator ablation, run independently on a linear and a nonlinear prior, finds fine-grid integration beats naive on 8/8 cells (sign-consistency p < 1/256) with the gap growing as the eval grid refines; the encoder axis is null with fine integration but time-aware-leading with naive. We release the prior and a preliminary zero-shot protocol on pharmacokinetic and physical-system data.

We provide a new theoretical framework for the variable-step deferred correction (DC) methods based on the well-known BDF2 formula. By using the discrete orthogonal convolution kernels, some high-order BDF2-DC methods are proven to be stable on arbitrary time grids according to the recent definition of stability (SINUM, 60: 2253-2272). It significantly relaxes the existing step-ratio restrictions for the BDF2-DC methods (BIT, 62: 1789-1822). The associated sharp error estimates are established by taking the numerical effects of the starting approximations into account, and they suggest that the BDF2-DC methods have no aftereffect, that is, the lower-order starting scheme for the BDF2 scheme will not cause a loss in the accuracy of the high-order BDF2-DC methods. Extensive tests on the graded and random time meshes are presented to support the new theory.

Neural fields are increasingly used as a light-weight, continuous, and differentiable signal representation in (bio)medical imaging. However, unlike discrete signal representations such as voxel grids, neural fields cannot be easily extended. As neural fields are, in essence, neural networks, prior signals represented in a neural field will degrade when the model is presented with new data due to catastrophic forgetting. This work examines the extent to which different neural field approaches suffer from catastrophic forgetting and proposes a strategy to mitigate this issue. We consider the scenario in which data becomes available incrementally, with only the most recent data available for neural field fitting. In a series of experiments on cardiac cine MRI data, we demonstrate how knowledge distillation mitigates catastrophic forgetting when the spatiotemporal domain is enlarged or the dimensionality of the represented signal is increased. We find that the amount of catastrophic forgetting depends, to a large extent, on the neural fields model used, and that distillation could enable continual learning in neural fields.

Auto-regressive models have achieved impressive results in 2D image generation by modeling joint distributions in grid space. In this paper, we extend auto-regressive models to 3D domains, and seek a stronger ability of 3D shape generation by improving auto-regressive models at capacity and scalability simultaneously. Firstly, we leverage an ensemble of publicly available 3D datasets to facilitate the training of large-scale models. It consists of a comprehensive collection of approximately 900,000 objects, with multiple properties of meshes, points, voxels, rendered images, and text captions. This diverse labeled dataset, termed Objaverse-Mix, empowers our model to learn from a wide range of object variations. However, directly applying 3D auto-regression encounters critical challenges of high computational demands on volumetric grids and ambiguous auto-regressive order along grid dimensions, resulting in inferior quality of 3D shapes. To this end, we then present a novel framework Argus3D in terms of capacity. Concretely, our approach introduces discrete representation learning based on a latent vector instead of volumetric grids, which not only reduces computational costs but also preserves essential geometric details by learning the joint distributions in a more tractable order. The capacity of conditional generation can thus be realized by simply concatenating various conditioning inputs to the latent vector, such as point clouds, categories, images, and texts. In addition, thanks to the simplicity of our model architecture, we naturally scale up our approach to a larger model with an impressive 3.6 billion parameters, further enhancing the quality of versatile 3D generation. Extensive experiments on four generation tasks demonstrate that Argus3D can synthesize diverse and faithful shapes across multiple categories, achieving remarkable performance.

In this report, we present RT-DETRv2, an improved Real-Time DEtection TRansformer (RT-DETR). RT-DETRv2 builds upon the previous state-of-the-art real-time detector, RT-DETR, and opens up a set of bag-of-freebies for flexibility and practicality, as well as optimizing the training strategy to achieve enhanced performance. To improve the flexibility, we suggest setting a distinct number of sampling points for features at different scales in the deformable attention to achieve selective multi-scale feature extraction by the decoder. To enhance practicality, we propose an optional discrete sampling operator to replace the grid_sample operator that is specific to RT-DETR compared to YOLOs. This removes the deployment constraints typically associated with DETRs. For the training strategy, we propose dynamic data augmentation and scale-adaptive hyperparameters customization to improve performance without loss of speed. Source code and pre-trained models will be available at https://github.com/lyuwenyu/RT-DETR.

Community detection on attributed graphs with rich semantic and topological information offers great potential for real-world network analysis, especially user matching in online games. Graph Neural Networks (GNNs) have recently enabled Deep Graph Clustering (DGC) methods to learn cluster assignments from semantic and topological information. However, their success depends on the prior knowledge related to the number of communities K, which is unrealistic due to the high costs and privacy issues of acquisition.In this paper, we investigate the community detection problem without prior K, referred to as K-Free Community Detection problem. To address this problem, we propose a novel Deep Adaptive and Generative model~(DAG) for community detection without specifying the prior K. DAG consists of three key components, i.e., a node representation learning module with masked attribute reconstruction, a community affiliation readout module, and a community number search module with group sparsity. These components enable DAG to convert the process of non-differentiable grid search for the community number, i.e., a discrete hyperparameter in existing DGC methods, into a differentiable learning process. In such a way, DAG can simultaneously perform community detection and community number search end-to-end. To alleviate the cost of acquiring community labels in real-world applications, we design a new metric, EDGE, to evaluate community detection methods even when the labels are not feasible. Extensive offline experiments on five public datasets and a real-world online mobile game dataset demonstrate the superiority of our DAG over the existing state-of-the-art (SOTA) methods. DAG has a relative increase of 7.35\% in teams in a Tencent online game compared with the best competitor.

Irregular multivariate time series impose a trade-off for long-horizon forecasting: discrete methods can distort temporal structure via re-gridding, while continuous-time models often require sequential solvers prone to drift. To bridge this gap, we present Latent Laplace Diffusion (LLapDiff), a generative framework that models the target as a low-dimensional latent trajectory, enabling horizon-wide generation without step-by-step integration over physical time. We guide the reverse process utilizing a stable modal parameterization motivated by stochastic port-Hamiltonian dynamics, and parameterize its mean evolution in the Laplace domain via learnable complex-conjugate poles, enabling direct evaluation over irregular timestamps. We also link continuous dynamics to irregular observations through renewal-averaging analysis, which maps sampling gaps to effective event-domain poles and motivates a gap-aware history summarizer. Extensive experiments show that LLapDiff improves over baselines in long-horizon forecasting, and its continuous-time generative nature supports missing-value imputation by querying the same model at historical timestamps. Code is available at https://github.com/pixelhero98/LLapDiffusion.

Scalable generation of outdoor driving scenes requires 3D representations that remain consistent across multiple viewpoints and scale to large areas. Existing solutions either rely on image or video generative models distilled to 3D space, harming the geometric coherence and restricting the rendering to training views, or are limited to small-scale 3D scene or object-centric generation. In this work, we propose a 3D generative framework based on Σ-Voxfield grid, a discrete representation where each occupied voxel stores a fixed number of colorized surface samples. To generate this representation, we train a semantic-conditioned diffusion model that operates on local voxel neighborhoods and uses 3D positional encodings to capture spatial structure. We scale to large scenes via progressive spatial outpainting over overlapping regions. Finally, we render the generated Σ-Voxfield grid with a deferred rendering module to obtain photorealistic images, enabling large-scale multiview-consistent 3D scene generation without per-scene optimization. Extensive experiments show that our approach can generate diverse large-scale urban outdoor scenes, renderable into photorealistic images with various sensor configurations and camera trajectories while maintaining moderate computation cost compared to existing approaches.

Structured-language models such as SceneScript reconstruct a scene as a short program of parametric commands, an inherently editable and semantically explicit representation. We ask three questions that stand between such models and their most compelling application, automated ingestion of existing buildings into BIM tools, studied here on synthetic scans: what is the scene made of, how fast can it be produced, and exactly where is each element. BIMScript answers all three within one grammar. First, we extend the layout language with per-element material and condition attributes, supervised by a vision-language-model material-passport corpus we build over 100k synthetic scenes (1.9M pseudo-labeled elements), and route image appearance to the material tokens through a lifted-feature point encoder. Second, we show that autoregressive decoding of these programs is dominated not by compute but by kernel-launch and host-synchronization overhead, and remove it with an output-exact CUDA-graph decoder (1.9 vs 6.4\,ms/step, 3.4times) plus a grammar-parallel, tolerance-verified draft-and-verify scheme that exploits the deterministic entity schema. Third, we address the model's 5cm token-grid granularity with training-free geometric snapping and a hybrid discrete--continuous decoder head that regresses a sub-bin offset, and measure how much of the residual error each recovers. Because each command maps one-to-one onto a native Revit object, we validate direct ingestion into a BIM authoring tool end to end with a working add-in and its IFC4 export, and the same program's language form is designed to support LLM-driven, sustainability-aware reasoning over the built asset.

Auto-Regressive (AR) models have achieved impressive results in 2D image generation by modeling joint distributions in the grid space. While this approach has been extended to the 3D domain for powerful shape generation, it still has two limitations: expensive computations on volumetric grids and ambiguous auto-regressive order along grid dimensions. To overcome these limitations, we propose the Improved Auto-regressive Model (ImAM) for 3D shape generation, which applies discrete representation learning based on a latent vector instead of volumetric grids. Our approach not only reduces computational costs but also preserves essential geometric details by learning the joint distribution in a more tractable order. Moreover, thanks to the simplicity of our model architecture, we can naturally extend it from unconditional to conditional generation by concatenating various conditioning inputs, such as point clouds, categories, images, and texts. Extensive experiments demonstrate that ImAM can synthesize diverse and faithful shapes of multiple categories, achieving state-of-the-art performance.

This work presents code to procedurally generate examples for the ARC training tasks. For each of the 400 tasks, an example generator following the transformation logic of the original examples was created. In effect, the assumed underlying distribution of examples for any given task was reverse engineered by implementing a means to sample from it. An attempt was made to cover an as large as reasonable space of possible examples for each task. That is, whenever the original examples of a given task may be limited in their diversity e.g. by having the dimensions of the grids, the set of symbols or number of objects constant or within tight bounds, even though the transformation does not require it, such constraints were lifted. Having access to not just a few examples per task, as the case for ARC, but instead very many, should enable a wide range of experiments that may be important stepping stones towards making leaps on the benchmark.

Diffusion models have shown remarkable results in generating 2D images and small-scale 3D objects. However, their application to the synthesis of large-scale 3D scenes has been rarely explored. This is mainly due to the inherent complexity and bulky size of 3D scenery data, particularly outdoor scenes, and the limited availability of comprehensive real-world datasets, which makes training a stable scene diffusion model challenging. In this work, we explore how to effectively generate large-scale 3D scenes using the coarse-to-fine paradigm. We introduce a framework, the Pyramid Discrete Diffusion model (PDD), which employs scale-varied diffusion models to progressively generate high-quality outdoor scenes. Experimental results of PDD demonstrate our successful exploration in generating 3D scenes both unconditionally and conditionally. We further showcase the data compatibility of the PDD model, due to its multi-scale architecture: a PDD model trained on one dataset can be easily fine-tuned with another dataset. Code is available at https://github.com/yuhengliu02/pyramid-discrete-diffusion.

Grid-based structures are commonly used to encode explicit features for graphics primitives such as images, signed distance functions (SDF), and neural radiance fields (NeRF) due to their simple implementation. However, in n-dimensional space, calculating the value of a sampled point requires interpolating the values of its 2^n neighboring vertices. The exponential scaling with dimension leads to significant computational overheads. To address this issue, we propose a simplex-based approach for encoding graphics primitives. The number of vertices in a simplex-based structure increases linearly with dimension, making it a more efficient and generalizable alternative to grid-based representations. Using the non-axis-aligned simplicial structure property, we derive and prove a coordinate transformation, simplicial subdivision, and barycentric interpolation scheme for efficient sampling, which resembles transformation procedures in the simplex noise algorithm. Finally, we use hash tables to store multiresolution features of all interest points in the simplicial grid, which are passed into a tiny fully connected neural network to parameterize graphics primitives. We implemented a detailed simplex-based structure encoding algorithm in C++ and CUDA using the methods outlined in our approach. In the 2D image fitting task, the proposed method is capable of fitting a giga-pixel image with 9.4% less time compared to the baseline method proposed by instant-ngp, while maintaining the same quality and compression rate. In the volumetric rendering setup, we observe a maximum 41.2% speedup when the samples are dense enough.

In stark contrast to the case of images, finding a concise, learnable discrete representation of 3D surfaces remains a challenge. In particular, while polygon meshes are arguably the most common surface representation used in geometry processing, their irregular and combinatorial structure often make them unsuitable for learning-based applications. In this work, we present VoroMesh, a novel and differentiable Voronoi-based representation of watertight 3D shape surfaces. From a set of 3D points (called generators) and their associated occupancy, we define our boundary representation through the Voronoi diagram of the generators as the subset of Voronoi faces whose two associated (equidistant) generators are of opposite occupancy: the resulting polygon mesh forms a watertight approximation of the target shape's boundary. To learn the position of the generators, we propose a novel loss function, dubbed VoroLoss, that minimizes the distance from ground truth surface samples to the closest faces of the Voronoi diagram which does not require an explicit construction of the entire Voronoi diagram. A direct optimization of the Voroloss to obtain generators on the Thingi32 dataset demonstrates the geometric efficiency of our representation compared to axiomatic meshing algorithms and recent learning-based mesh representations. We further use VoroMesh in a learning-based mesh prediction task from input SDF grids on the ABC dataset, and show comparable performance to state-of-the-art methods while guaranteeing closed output surfaces free of self-intersections.

Advancements in computing power have made it possible to numerically simulate large-scale fluid-mechanical and/or particulate systems, many of which are integral to core industrial processes. Among the different numerical methods available, the discrete element method (DEM) provides one of the most accurate representations of a wide range of physical systems involving granular and discontinuous materials. Consequently, DEM has become a widely accepted approach for tackling engineering problems connected to granular flows and powder mechanics. Additionally, DEM can be integrated with grid-based computational fluid dynamics (CFD) methods, enabling the simulation of chemical processes taking place, e.g., in fluidized beds. However, DEM is computationally intensive because of the intrinsic multiscale nature of particulate systems, restricting simulation duration or number of particles. Towards this end, NeuralDEM presents an end-to-end approach to replace slow numerical DEM routines with fast, adaptable deep learning surrogates. NeuralDEM is capable of picturing long-term transport processes across different regimes using macroscopic observables without any reference to microscopic model parameters. First, NeuralDEM treats the Lagrangian discretization of DEM as an underlying continuous field, while simultaneously modeling macroscopic behavior directly as additional auxiliary fields. Second, NeuralDEM introduces multi-branch neural operators scalable to real-time modeling of industrially-sized scenarios - from slow and pseudo-steady to fast and transient. Such scenarios have previously posed insurmountable challenges for deep learning models. Notably, NeuralDEM faithfully models coupled CFD-DEM fluidized bed reactors of 160k CFD cells and 500k DEM particles for trajectories of 28s. NeuralDEM will open many new doors to advanced engineering and much faster process cycles.

A quadrilateral block decomposition of a planar domain is judged by whether it is complete, whether its elements are well shaped, and how many of its vertices are irregular. The last has a provable floor: the discrete Gauss-Bonnet identity enforces a lower bound on the total vertex irregularity of any all-quadrilateral mesh of a given domain purely based on its topology and corner angles. We train a reinforcement learning agent to build decompositions that reach this bound, which we call par. It acts directly on the mesh's half-edge data structure through local edits, with a policy network whose convolutions follow the mesh's own connectivity, so it applies unchanged to domains larger than any seen in training. The reward targets the floor directly, and it is sparse: random play reaches it on no domain with more than eight sides. We overcome this exploration barrier via behaviour cloning on optimal meshes that are trivial to construct, walked backward into demonstrations, before training it with PPO. On 96 held-out domains the agent produces an all-quadrilateral mesh on every one, a usable one on 95.7 on average, and a provably optimal one on 90; Gmsh's strongest configuration at the same element count completes 51, is usable on 38 and optimal on none, and even at three to fourteen times the elements never produces a more regular mesh. On 64 domains twice the training size the agent completes all, is usable on 62, and keeps a median excess over par below one against Gmsh's 39 at the same element count.

Convolutional Neural Networks (CNN) have been successful in processing data signals that are uniformly sampled in the spatial domain (e.g., images). However, most data signals do not natively exist on a grid, and in the process of being sampled onto a uniform physical grid suffer significant aliasing error and information loss. Moreover, signals can exist in different topological structures as, for example, points, lines, surfaces and volumes. It has been challenging to analyze signals with mixed topologies (for example, point cloud with surface mesh). To this end, we develop mathematical formulations for Non-Uniform Fourier Transforms (NUFT) to directly, and optimally, sample nonuniform data signals of different topologies defined on a simplex mesh into the spectral domain with no spatial sampling error. The spectral transform is performed in the Euclidean space, which removes the translation ambiguity from works on the graph spectrum. Our representation has four distinct advantages: (1) the process causes no spatial sampling error during the initial sampling, (2) the generality of this approach provides a unified framework for using CNNs to analyze signals of mixed topologies, (3) it allows us to leverage state-of-the-art backbone CNN architectures for effective learning without having to design a particular architecture for a particular data structure in an ad-hoc fashion, and (4) the representation allows weighted meshes where each element has a different weight (i.e., texture) indicating local properties. We achieve results on par with the state-of-the-art for the 3D shape retrieval task, and a new state-of-the-art for the point cloud to surface reconstruction task.

We introduce Discrete Voxel Diffusion (DVD), a discrete diffusion framework to generate, assess, and edit sparse voxels for SLat (Structured LATent) based 3D generative pipelines. Although discrete diffusion has not generally displaced continuous diffusion in image-like generation, we show that it can be an effective first-stage prior for sparse voxel scaffolds. By treating voxel occupancy as a native discrete variable, DVD avoids continuous-to-discrete thresholding and provides a simple framework for voxel generation, uncertainty estimation, and editing. Beyond quality gains, DVD provides more interpretable generation dynamics through explicit categorical modeling. Furthermore, we leverage the predictive entropy as a robust uncertainty metric to identify ambiguous voxel regions and complicated samples, facilitating tasks such as data filtering and quality assessment. Finally, we propose a lightweight fine-tuning strategy using block-structured perturbation patterns. This approach empowers the model to inpaint and edit voxels within a single sampling round, requiring negligible auxiliary computation and no additional model evaluations. Code is available at https://github.com/TeCai/DVD.

This paper proposes a novel sampling-based motion planner, which integrates in RRT* (Rapidly exploring Random Tree star) a database of pre-computed motion primitives to alleviate its computational load and allow for motion planning in a dynamic or partially known environment. The database is built by considering a set of initial and final state pairs in some grid space, and determining for each pair an optimal trajectory that is compatible with the system dynamics and constraints, while minimizing a cost. Nodes are progressively added to the tree of feasible trajectories in the RRT* algorithm by extracting at random a sample in the gridded state space and selecting the best obstacle-free motion primitive in the database that joins it to an existing node. The tree is rewired if some nodes can be reached from the new sampled state through an obstacle-free motion primitive with lower cost. The computationally more intensive part of motion planning is thus moved to the preliminary offline phase of the database construction {at the price of some performance degradation due to gridding. Grid resolution can be tuned so as to compromise between (sub)optimality and size of the database. The planner is shown to be }asymptotically optimal as the grid resolution goes to zero and the number of sampled states grows to infinity.

Sublinear time complexity is required by the massively parallel computation (MPC) model. Breaking dynamic programs into a set of sparse dynamic programs that can be divided, solved, and merged in sublinear time. The rectangle escape problem (REP) is defined as follows: For n axis-aligned rectangles inside an axis-aligned bounding box B, extend each rectangle in only one of the four directions: up, down, left, or right until it reaches B and the density k is minimized, where k is the maximum number of extensions of rectangles to the boundary that pass through a point inside bounding box B. REP is NP-hard for k>1. If the rectangles are points of a grid (or unit squares of a grid), the problem is called the square escape problem (SEP) and it is still NP-hard. We give a 2-approximation algorithm for SEP with kgeq2 with time complexity O(n^{3/2}k^2). This improves the time complexity of existing algorithms which are at least quadratic. Also, the approximation ratio of our algorithm for kgeq 3 is 3/2 which is tight. We also give a 8-approximation algorithm for REP with time complexity O(nlog n+nk) and give a MPC version of this algorithm for k=O(1) which is the first parallel algorithm for this problem.

Visual generation has witnessed remarkable progress in single-image tasks, yet extending these capabilities to temporal sequences remains challenging. Current approaches either build specialized video models from scratch with enormous computational costs or add separate motion modules to image generators, both requiring learning temporal dynamics anew. We observe that modern image generation models possess underutilized potential in handling structured layouts with implicit temporal understanding. Building on this insight, we introduce GRID, which reformulates temporal sequences as grid layouts, enabling holistic processing of visual sequences while leveraging existing model capabilities. Through a parallel flow-matching training strategy with coarse-to-fine scheduling, our approach achieves up to 67 faster inference speeds while using <1/1000 of the computational resources compared to specialized models. Extensive experiments demonstrate that GRID not only excels in temporal tasks from Text-to-Video to 3D Editing but also preserves strong performance in image generation, establishing itself as an efficient and versatile omni-solution for visual generation.

An implicit Euler finite-volume scheme for a nonlocal cross-diffusion system on the multidimensional torus is analyzed. The equations describe the dynamics of population species with repulsive or attractive interactions. The numerical scheme is based on a generalized Scharfetter-Gummel discretization of the nonlocal flux term. For merely integrable kernel functions, the scheme preserves the positivity, total mass, and entropy structure. The existence of a discrete solution and its convergence to a solution to the continuous problem, as the mesh size tends to zero, are shown. A key difficulty is the degeneracy of the generalized Bernoulli function in the Scharfetter-Gummel approximation. This issue is overcome by proving a uniform estimate for the discrete Fisher information, which requires both the Boltzmann and Rao entropy inequalities. Numerical simulations illustrate the features of the scheme in one and two space dimensions.

The Neural Turing Machine (NTM) is more expressive than all previously considered models because of its external memory. It can be viewed as a broader effort to use abstract external Interfaces and to learn a parametric model that interacts with them. The capabilities of a model can be extended by providing it with proper Interfaces that interact with the world. These external Interfaces include memory, a database, a search engine, or a piece of software such as a theorem verifier. Some of these Interfaces are provided by the developers of the model. However, many important existing Interfaces, such as databases and search engines, are discrete. We examine feasibility of learning models to interact with discrete Interfaces. We investigate the following discrete Interfaces: a memory Tape, an input Tape, and an output Tape. We use a Reinforcement Learning algorithm to train a neural network that interacts with such Interfaces to solve simple algorithmic tasks. Our Interfaces are expressive enough to make our model Turing complete.

We study the relation between equal-weight circle quadrature, Gauss--Chebyshev quadrature, and planar Minkowski reconstruction. The regular N-point grid is an mathbb S^1-design of strength N-1; a half-step rotation of the 2M-point grid projects to the classical M-point Gauss--Chebyshev rule. A common family of quadrature-error functionals gives exact identities for integration error, mixed-area error, and support-function error. For Nge3, the centered Minkowski polygon P_N with perimeter 2π has the exact Hausdorff distance from the unit disk B^2 \[ d_H(P_N,B^2)=1-\fracπ{N}\cot\fracπ{N} =π^2{3N^2}+O(N^{-4}). \] With Steiner centering, we obtain d_H(K_μ,K_ν)leπW_1(μ,ν) for balanced, nondegenerate probability measures, where W_1 uses geodesic distance. Its exponent is sharp even for smooth positive densities near the uniform measure. The identity W_1(ν_N,σ)=π/(2N) yields a general O(N^{-1}) bound for the regular grid. The sharper O(N^{-2}) rate follows from the sparse discrepancy spectrum and the inverse multiplier (1-k^2)^{-1}. Finally, a perturbation estimate gives sufficient conditions for preserving the quadratic rate and its leading constant.

We develop and analyse a conforming piecewise affine finite element method for the Grad--Mercier equation, a nonlocal elliptic model for magnetic equilibria whose source depends on the global rank of a flux function. The principal difficulty is that the unique continuum equilibrium has a maximum plateau of prescribed positive area. The solution therefore samples the rank law only above the plateau mass, while perturbations that separate equal values may distribute this mass over several numerical ranks and thereby alter the non-strict rank source. We exploit the continuum well-posedness structure to replace the rank law by an equivalent clipped, nonnegative law, and replace Lebesgue measure by a mass-lumped nodal measure. Equal nodal values are assigned a common rank interval, thereby retaining the full lumped mass of each tied level. The resulting weighted rearrangement gives a strictly convex discrete energy and hence a unique finite element equilibrium. On meshes satisfying a discrete comparison principle, the discrete equilibrium is nonnegative and bounded above by a computable barrier. A Poisson-preconditioned rearrangement iteration converges on each fixed mesh and admits computable a posteriori energy and energy-norm bounds. As polygonal finite element domains converge to the physical cross-section, the discrete equilibria converge strongly in H^1_0(Ω) and uniformly on overlineΩ to the unique Grad--Mercier equilibrium. Reconstructed equilibrium sources converge weak-* in L^{infty}(Ω) to the original nonlocal source.

Grid-based approaches to approximate nearest neighbor (ANN) search have been absent from modern scaling analyses. We present a systematic characterization of a multiprobe grid algorithm with respect to dataset size N and dimensionality d. Our experiments reveal a previously unreported d-scaling crossover on the GloVe embedding family, in which multiprobe grid search maintains an approximately constant dimensional scaling exponent while other graph-, tree-, and partitioning-based methods exhibit degrading throughput. The advantage comes with near-linear query scaling in N, but also with lower indexing cost than competing ANN methods. Our results suggest that grid-based methods such as multiprobe grid may be competitive in rebuild-heavy or high-dimensional settings where indexing cost and dimensional robustness dictate performance. More broadly, recent work has formalized self-attention as an ANN operation. Thus, the N- and d-scaling properties of ANN algorithms may guide cost analysis of efficient transformer architectures. Code is available at: https://github.com/weiz345/MultiProbeANN.

We study the set of networks, which consist of sources, sinks and neutral points, bijective to the permutations. The set of directed edges, which characterizes a network, is constructed from a polyomino or a Rothe diagram of a permutation through a Dyck tiling on a ribbon. We introduce a new combinatorial object similar to a tree-like tableau, which we call a forest. A forest is shown to give a permutation, and be bijective to a network corresponding to the inverse of the permutation. We show that the poset of networks is a finite graded lattice and admits an EL-labeling. By use of this EL-labeling, we show the lattice is supersolvable and compute the M\"obius function of an interval of the poset.

This paper presents an end-to-end neural architecture based on Diffusion Models for spatial puzzle solving, particularly jigsaw puzzle and room arrangement tasks. In the latter task, for instance, the proposed system "PuzzleFusion" takes a set of room layouts as polygonal curves in the top-down view and aligns the room layout pieces by estimating their 2D translations and rotations, akin to solving the jigsaw puzzle of room layouts. A surprising discovery of the paper is that the simple use of a Diffusion Model effectively solves these challenging spatial puzzle tasks as a conditional generation process. To enable learning of an end-to-end neural system, the paper introduces new datasets with ground-truth arrangements: 1) 2D Voronoi jigsaw dataset, a synthetic one where pieces are generated by Voronoi diagram of 2D pointset; and 2) MagicPlan dataset, a real one offered by MagicPlan from its production pipeline, where pieces are room layouts constructed by augmented reality App by real-estate consumers. The qualitative and quantitative evaluations demonstrate that our approach outperforms the competing methods by significant margins in all the tasks.

We present GeoGrid-Bench, a benchmark designed to evaluate the ability of foundation models to understand geo-spatial data in the grid structure. Geo-spatial datasets pose distinct challenges due to their dense numerical values, strong spatial and temporal dependencies, and unique multimodal representations including tabular data, heatmaps, and geographic visualizations. To assess how foundation models can support scientific research in this domain, GeoGrid-Bench features large-scale, real-world data covering 16 climate variables across 150 locations and extended time frames. The benchmark includes approximately 3,200 question-answer pairs, systematically generated from 8 domain expert-curated templates to reflect practical tasks encountered by human scientists. These range from basic queries at a single location and time to complex spatiotemporal comparisons across regions and periods. Our evaluation reveals that vision-language models perform best overall, and we provide a fine-grained analysis of the strengths and limitations of different foundation models in different geo-spatial tasks. This benchmark offers clearer insights into how foundation models can be effectively applied to geo-spatial data analysis and used to support scientific research.

Quantizing the weights of a neural network has two steps: (1) Finding a good low bit-complexity representation for weights (which we call the quantization grid) and (2) Rounding the original weights to values in the quantization grid. In this paper, we study the problem of rounding optimally given any quantization grid. The simplest and most commonly used way to round is Round-to-Nearest (RTN). By rounding in a data-dependent way instead, one can improve the quality of the quantized model significantly. We study the rounding problem from the lens of discrepancy theory, which studies how well we can round a continuous solution to a discrete solution without affecting solution quality too much. We prove that given m=poly(1/ε) samples from the data distribution, we can round all but O(m) model weights such that the expected approximation error of the quantized model on the true data distribution is le ε as long as the space of gradients of the original model is approximately low rank (which we empirically validate). Our proof, which is algorithmic, inspired a simple and practical rounding algorithm called DiscQuant. In our experiments, we demonstrate that DiscQuant significantly improves over the prior state-of-the-art rounding method called GPTQ and the baseline RTN over a range of benchmarks on Phi3mini-3.8B and Llama3.1-8B. For example, rounding Phi3mini-3.8B to a fixed quantization grid with 3.25 bits per parameter using DiscQuant gets 64\% accuracy on the GSM8k dataset, whereas GPTQ achieves 54\% and RTN achieves 31\% (the original model achieves 84\%). We make our code available at https://github.com/jerry-chee/DiscQuant.

This paper presents MetricGrids, a novel grid-based neural representation that combines elementary metric grids in various metric spaces to approximate complex nonlinear signals. While grid-based representations are widely adopted for their efficiency and scalability, the existing feature grids with linear indexing for continuous-space points can only provide degenerate linear latent space representations, and such representations cannot be adequately compensated to represent complex nonlinear signals by the following compact decoder. To address this problem while keeping the simplicity of a regular grid structure, our approach builds upon the standard grid-based paradigm by constructing multiple elementary metric grids as high-order terms to approximate complex nonlinearities, following the Taylor expansion principle. Furthermore, we enhance model compactness with hash encoding based on different sparsities of the grids to prevent detrimental hash collisions, and a high-order extrapolation decoder to reduce explicit grid storage requirements. experimental results on both 2D and 3D reconstructions demonstrate the superior fitting and rendering accuracy of the proposed method across diverse signal types, validating its robustness and generalizability. Code is available at https://github.com/wangshu31/MetricGrids}{https://github.com/wangshu31/MetricGrids.

Discrete diffusion models have emerged as a powerful generative modeling framework for discrete data with successful applications spanning from text generation to image synthesis. However, their deployment faces challenges due to the high dimensionality of the state space, necessitating the development of efficient inference algorithms. Current inference approaches mainly fall into two categories: exact simulation and approximate methods such as tau-leaping. While exact methods suffer from unpredictable inference time and redundant function evaluations, tau-leaping is limited by its first-order accuracy. In this work, we advance the latter category by tailoring the first extension of high-order numerical inference schemes to discrete diffusion models, enabling larger step sizes while reducing error. We rigorously analyze the proposed schemes and establish the second-order accuracy of the theta-trapezoidal method in KL divergence. Empirical evaluations on GPT-2 level text and ImageNet-level image generation tasks demonstrate that our method achieves superior sample quality compared to existing approaches under equivalent computational constraints.

We present XLand-MiniGrid, a suite of tools and grid-world environments for meta-reinforcement learning research inspired by the diversity and depth of XLand and the simplicity and minimalism of MiniGrid. XLand-Minigrid is written in JAX, designed to be highly scalable, and can potentially run on GPU or TPU accelerators, democratizing large-scale experimentation with limited resources. To demonstrate the generality of our library, we have implemented some well-known single-task environments as well as new meta-learning environments capable of generating 10^8 distinct tasks. We have empirically shown that the proposed environments can scale up to 2^{13} parallel instances on the GPU, reaching tens of millions of steps per second.

Native 3D generators turn one image into a single mesh. TRELLIS.2 and its peers deliver high-fidelity non-watertight geometry with materials, but the output is one fused object, while downstream work such as editing, rigging and simulation operates on part-level assets. A naive idea is to run a 3D segmentation network on the fused mesh that TRELLIS.2 generates, but such pipelines are slow and bounded by the accuracy of the segmentation. We want a simple way to extend an existing native 3D generator to the part level. But we face a critical problem: the O-Voxel grid stores one sheet of surface per voxel, so a single volume cannot represent the interface where two parts touch, at any resolution. We introduce a dual-volume representation to solve this problem and put forward KaiNinja, a part-level extension of TRELLIS.2 built on a dual-volume form of its O-Voxel representation. KaiNinja keeps the generation speed and quality of TRELLIS.2 while extending it to the part level, with no mask or segmenter in the pipeline. Its training data come from sources of many kinds, including CAD models and assets authored by an LLM-driven agent; to our knowledge it is the first 3D generative model trained on agent-authored part data. Surprisingly, we also find that whole-object fidelity improves over the same backbone fine-tuned on the same dataset. Against part generation pipelines of different paradigms, it lowers whole-object Chamfer distance by 40% and raises strict part F-score by 16%.

We study the problem of predicting numeric labels that are constrained to the integers or to a subrange of the integers. For example, the number of up-votes on social media posts, or the number of bicycles available at a public rental station. While it is possible to model these as continuous values, and to apply traditional regression, this approach changes the underlying distribution on the labels from discrete to continuous. Discrete distributions have certain benefits, which leads us to the question whether such integer labels can be modeled directly by a discrete distribution, whose parameters are predicted from the features of a given instance. Moreover, we focus on the use case of output distributions of neural networks, which adds the requirement that the parameters of the distribution be continuous so that backpropagation and gradient descent may be used to learn the weights of the network. We investigate several options for such distributions, some existing and some novel, and test them on a range of tasks, including tabular learning, sequential prediction and image generation. We find that overall the best performance comes from two distributions: Bitwise, which represents the target integer in bits and places a Bernoulli distribution on each, and a discrete analogue of the Laplace distribution, which uses a distribution with exponentially decaying tails around a continuous mean.

Generative models have advanced significantly in sampling material systems with continuous variables, such as atomistic structures. However, their application to discrete variables, like atom types or spin states, remains underexplored. In this work, we introduce a Boltzmann generator built on discrete flow matching, specifically tailored for systems with discrete phase-space coordinates (e.g., the Ising model or crystalline compounds). This approach enables a single model to sample free energy surfaces over a wide temperature range with minimal training overhead. In addition, the model generation is scalable to larger lattice sizes than those in the training set. We demonstrate the effectiveness of our approach on the 2D Ising model, showing efficient and reliable free energy sampling. This framework provides a scalable and computationally efficient solution for discrete coordinate systems and can be extended to sample the alchemical degrees of freedom in crystalline compounds.

We study diffusion-based model predictive control (Diffusion-MPC) in discrete combinatorial domains using Tetris as a case study. Our planner samples candidate placement sequences with a MaskGIT-style discrete denoiser and selects actions via reranking. We analyze three key factors: (1) feasibility-constrained sampling via logit masking over valid placements, (2) reranking strategies using a heuristic score, a pretrained DQN critic, and a hybrid combination, and (3) compute scaling in candidate count and planning horizon. We find that feasibility masking is necessary in discrete domains, removing invalid action mass (46%) and yielding a 6.8% improvement in score and 5.6% improvement in survival over unconstrained sampling. Naive DQN reranking is systematically misaligned with rollout quality, producing high decision regret (mean 17.6, p90 36.6). Shorter planning horizons outperform longer ones under sparse and delayed rewards, suggesting uncertainty compounding in long imagined rollouts. Overall, compute choices (K, H) determine dominant failure modes: small K limits candidate quality, while larger H amplifies misranking and model mismatch. Our findings highlight structural challenges of diffusion planners in discrete environments and provide practical diagnostics for critic integration.

Voronoi diagrams are essential geometrical structures with numerous applications, particularly astrophysics-driven finite volume methods. While serial algorithms for constructing these entities are well-established, parallel construction remains challenging. This is especially true in distributed memory systems, where each host manages only a subset of the input points. This process requires redistributing points across hosts and accurately computing the corresponding Voronoi cells. In this paper, we introduce a new distributed construction algorithm, which is implemented in our open-source C++ 3-dimensional Voronoi construction framework. Our approach leverages Delaunay triangulation as an intermediate step, which is then transformed into a Voronoi diagram. We introduce the algorithms we implemented for the precise construction and our load-balancing approach and compare the running time with other state-of-the-art frameworks. MadVoro is a versatile tool that can be applied in various scientific domains, such as mesh decomposition, computational physics, chemistry, and machine learning.

All tables can be represented as grids. Based on this observation, we propose GridFormer, a novel approach for interpreting unconstrained table structures by predicting the vertex and edge of a grid. First, we propose a flexible table representation in the form of an MXN grid. In this representation, the vertexes and edges of the grid store the localization and adjacency information of the table. Then, we introduce a DETR-style table structure recognizer to efficiently predict this multi-objective information of the grid in a single shot. Specifically, given a set of learned row and column queries, the recognizer directly outputs the vertexes and edges information of the corresponding rows and columns. Extensive experiments on five challenging benchmarks which include wired, wireless, multi-merge-cell, oriented, and distorted tables demonstrate the competitive performance of our model over other methods.

Understanding spatial location and relationships is a fundamental capability for modern artificial intelligence systems. Insights from human spatial cognition provide valuable guidance in this domain. Neuroscientific discoveries have highlighted the role of grid cells as a fundamental neural component for spatial representation, including distance computation, path integration, and scale discernment. In this paper, we introduce a novel positional encoding scheme inspired by Fourier analysis and the latest findings in computational neuroscience regarding grid cells. Assuming that grid cells encode spatial position through a summation of Fourier basis functions, we demonstrate the translational invariance of the grid representation during inner product calculations. Additionally, we derive an optimal grid scale ratio for multi-dimensional Euclidean spaces based on principles of biological efficiency. Utilizing these computational principles, we have developed a Grid-cell inspired Positional Encoding technique, termed GridPE, for encoding locations within high-dimensional spaces. We integrated GridPE into the Pyramid Vision Transformer architecture. Our theoretical analysis shows that GridPE provides a unifying framework for positional encoding in arbitrary high-dimensional spaces. Experimental results demonstrate that GridPE significantly enhances the performance of transformers, underscoring the importance of incorporating neuroscientific insights into the design of artificial intelligence systems.

A longstanding open problem asks for an aperiodic monotile, also known as an "einstein": a shape that admits tilings of the plane, but never periodic tilings. We answer this problem for topological disk tiles by exhibiting a continuum of combinatorially equivalent aperiodic polygons. We first show that a representative example, the "hat" polykite, can form clusters called "metatiles", for which substitution rules can be defined. Because the metatiles admit tilings of the plane, so too does the hat. We then prove that generic members of our continuum of polygons are aperiodic, through a new kind of geometric incommensurability argument. Separately, we give a combinatorial, computer-assisted proof that the hat must form hierarchical -- and hence aperiodic -- tilings.

We consider the problem of estimating the optimal transport map between two probability distributions, P and Q in mathbb R^d, on the basis of i.i.d. samples. All existing statistical analyses of this problem require the assumption that the transport map is Lipschitz, a strong requirement that, in particular, excludes any examples where the transport map is discontinuous. As a first step towards developing estimation procedures for discontinuous maps, we consider the important special case where the data distribution Q is a discrete measure supported on a finite number of points in mathbb R^d. We study a computationally efficient estimator initially proposed by Pooladian and Niles-Weed (2021), based on entropic optimal transport, and show in the semi-discrete setting that it converges at the minimax-optimal rate n^{-1/2}, independent of dimension. Other standard map estimation techniques both lack finite-sample guarantees in this setting and provably suffer from the curse of dimensionality. We confirm these results in numerical experiments, and provide experiments for other settings, not covered by our theory, which indicate that the entropic estimator is a promising methodology for other discontinuous transport map estimation problems.

We present X^3 (pronounced XCube), a novel generative model for high-resolution sparse 3D voxel grids with arbitrary attributes. Our model can generate millions of voxels with a finest effective resolution of up to 1024^3 in a feed-forward fashion without time-consuming test-time optimization. To achieve this, we employ a hierarchical voxel latent diffusion model which generates progressively higher resolution grids in a coarse-to-fine manner using a custom framework built on the highly efficient VDB data structure. Apart from generating high-resolution objects, we demonstrate the effectiveness of XCube on large outdoor scenes at scales of 100mtimes100m with a voxel size as small as 10cm. We observe clear qualitative and quantitative improvements over past approaches. In addition to unconditional generation, we show that our model can be used to solve a variety of tasks such as user-guided editing, scene completion from a single scan, and text-to-3D. More results and details can be found at https://research.nvidia.com/labs/toronto-ai/xcube/.

We introduce the Discrete Min-Max Violation (DMMV) as a general optimization problem which seeks an assignment of discrete values to variables that minimizes the largest constraint violation. This context-free mathematical formulation is applicable to a wide range of use cases that have worst-case performance requirements. After defining the DMMV problem mathematically, we explore its properties to establish a foundational understanding. To tackle DMMV instance sizes of practical relevance, we develop a GPU-accelerated heuristic that takes advantage of the mathematical properties of DMMV for speeding up the solution process. We demonstrate the versatile applicability of our heuristic by solving three optimization problems as use cases: (1) post-training quantization of language models, (2) discrete tomography, and (3) Finite Impulse Response (FIR) filter design. In quantization without outlier separation, our heuristic achieves 14% improvement on average over existing methods. In discrete tomography, it reduces reconstruction error by 16% under uniform noise and accelerates computations by a factor of 6 on GPU. For FIR filter design, it nearly achieves 50% ripple reduction compared to using the commercial integer optimization solver, Gurobi. Our comparative results point to the benefits of studying DMMV as a context-free optimization problem and the advantages that our proposed heuristic offers on three distinct problems. Our GPU-accelerated heuristic will be made open-source to further stimulate research on DMMV and its other applications. The code is available at https://anonymous.4open.science/r/AMVM-5F3E/

We study the problem of posterior sampling in discrete-state spaces using discrete diffusion models. While posterior sampling methods for continuous diffusion models have achieved remarkable progress, analogous methods for discrete diffusion models remain challenging. In this work, we introduce a principled plug-and-play discrete diffusion posterior sampling algorithm based on split Gibbs sampling, which we call SG-DPS. Our algorithm enables reward-guided generation and solving inverse problems in discrete-state spaces. We demonstrate that SG-DPS converges to the true posterior distribution on synthetic benchmarks, and enjoys state-of-the-art posterior sampling performance on a range of benchmarks for discrete data, achieving up to 2x improved performance compared to existing baselines.

Discrete diffusion has recently emerged as a promising paradigm in discrete data modeling. However, existing methods typically rely on a fixed rate transition matrix during training, which not only limits the expressiveness of latent representations, a fundamental strength of variational methods, but also constrains the overall design space. To address these limitations, we propose Discrete Markov Bridge, a novel framework specifically designed for discrete representation learning. Our approach is built upon two key components: Matrix Learning and Score Learning. We conduct a rigorous theoretical analysis, establishing formal performance guarantees for Matrix Learning and proving the convergence of the overall framework. Furthermore, we analyze the space complexity of our method, addressing practical constraints identified in prior studies. Extensive empirical evaluations validate the effectiveness of the proposed Discrete Markov Bridge, which achieves an Evidence Lower Bound (ELBO) of 1.38 on the Text8 dataset, outperforming established baselines. Moreover, the proposed model demonstrates competitive performance on the CIFAR-10 dataset, achieving results comparable to those obtained by image-specific generation approaches.

Neural graphics primitives are faster and achieve higher quality when their neural networks are augmented by spatial data structures that hold trainable features arranged in a grid. However, existing feature grids either come with a large memory footprint (dense or factorized grids, trees, and hash tables) or slow performance (index learning and vector quantization). In this paper, we show that a hash table with learned probes has neither disadvantage, resulting in a favorable combination of size and speed. Inference is faster than unprobed hash tables at equal quality while training is only 1.2-2.6x slower, significantly outperforming prior index learning approaches. We arrive at this formulation by casting all feature grids into a common framework: they each correspond to a lookup function that indexes into a table of feature vectors. In this framework, the lookup functions of existing data structures can be combined by simple arithmetic combinations of their indices, resulting in Pareto optimal compression and speed.

The Entropic Optimal Transport (EOT) problem and its dynamic counterpart, the Schrödinger bridge (SB) problem, play an important role in modern machine learning, linking generative modeling with optimal transport theory. While recent advances in discrete diffusion and flow models have sparked growing interest in applying SB methods to discrete domains, there is still no reliable way to evaluate how well these methods actually solve the underlying problem. We address this challenge by introducing a benchmark for SB on discrete spaces. Our construction yields pairs of probability distributions with analytically known SB solutions, enabling rigorous evaluation. As a byproduct of building this benchmark, we obtain two new SB algorithms, DLightSB and DLightSB-M, and additionally extend prior related work to construct the α-CSBM algorithm. We demonstrate the utility of our benchmark by evaluating both existing and new solvers in high-dimensional discrete settings. This work provides the first step toward proper evaluation of SB methods on discrete spaces, paving the way for more reproducible future studies.

The elastic response of mechanical, chemical, and biological systems is often modeled using a discrete arrangement of Hookean springs, either representing finite material elements or even the molecular bonds of a system. However, to date, there is no direct derivation of the relation between a general discrete spring network, with arbitrary geometry, and it's corresponding elastic continuum. Furthermore, understanding the network's mechanical response requires simulations that may be expensive computationally. Here we report a method to derive the exact elastic continuum model of any discrete network of springs, requiring network geometry and topology only. We identify and calculate the so-called "non-affine" displacements. Explicit comparison of our calculations to simulations of different crystalline and disordered configurations, shows we successfully capture the mechanics even of auxetic materials. Our method is valid for residually stressed systems with non-trivial geometries, and is an essential step in generalizing active stresses on such discrete systems. It is easily generalizable to other discrete models, and opens the possibility of a rational design of elastic systems.

Devriendt and Lambiotte recently introduced the node resistance curvature, a notion of graph curvature based on the effective resistance matrix. In this paper, we begin the study of the behavior of the node resistance curvature under the operation of the Cartesian graph product. We study the natural question of global positivity of node resistance curvature of the Cartesian product of positively-curved graphs, and prove that, whenever m,nge3, the node resistance curvature of the interior vertices of a mtimes n grid is always nonpositive, while it is always nonnegative on the boundary of such grids. For completeness, we also prove a number of results on node resistance curvature in 2times n grids and exhibit a counterexample to a generalization. We also give generic bounds and suggest several further questions for future study.

The Game of Life (Life), a well known algorithm within the broader class of cellular automata (CA), exhibits complex emergent dynamics, with extreme sensitivity to initial conditions. Modeling and predicting such intricate behavior without explicit knowledge of the system's underlying topology presents a significant challenge, motivating the development of algorithms that can generalize across various grid configurations and boundary conditions. We develop a decoder-only generative pretrained transformer model to solve this problem, showing that our model can simulate Life on a toroidal grid with no prior knowledge on the size of the grid, or its periodic boundary conditions (LifeGPT). LifeGPT is topology-agnostic with respect to its training data and our results show that a GPT model is capable of capturing the deterministic rules of a Turing-complete system with near-perfect accuracy, given sufficiently diverse training data. We also introduce the idea of an `autoregressive autoregressor' to recursively implement Life using LifeGPT. Our results pave the path towards true universal computation within a large language model (LLM) framework, synthesizing of mathematical analysis with natural language processing, and probing AI systems for situational awareness about the evolution of such algorithms without ever having to compute them. Similar GPTs could potentially solve inverse problems in multicellular self-assembly by extracting CA-compatible rulesets from real-world biological systems to create new predictive models, which would have significant consequences for the fields of bioinspired materials, tissue engineering, and architected materials design.

The paper presents a novel approach for vector-floorplan generation via a diffusion model, which denoises 2D coordinates of room/door corners with two inference objectives: 1) a single-step noise as the continuous quantity to precisely invert the continuous forward process; and 2) the final 2D coordinate as the discrete quantity to establish geometric incident relationships such as parallelism, orthogonality, and corner-sharing. Our task is graph-conditioned floorplan generation, a common workflow in floorplan design. We represent a floorplan as 1D polygonal loops, each of which corresponds to a room or a door. Our diffusion model employs a Transformer architecture at the core, which controls the attention masks based on the input graph-constraint and directly generates vector-graphics floorplans via a discrete and continuous denoising process. We have evaluated our approach on RPLAN dataset. The proposed approach makes significant improvements in all the metrics against the state-of-the-art with significant margins, while being capable of generating non-Manhattan structures and controlling the exact number of corners per room. A project website with supplementary video and document is here https://aminshabani.github.io/housediffusion.

With the emergence of powerful representations of continuous data in the form of neural fields, there is a need for discretization invariant learning: an approach for learning maps between functions on continuous domains without being sensitive to how the function is sampled. We present a new framework for understanding and designing discretization invariant neural networks (DI-Nets), which generalizes many discrete networks such as convolutional neural networks as well as continuous networks such as neural operators. Our analysis establishes upper bounds on the deviation in model outputs under different finite discretizations, and highlights the central role of point set discrepancy in characterizing such bounds. This insight leads to the design of a family of neural networks driven by numerical integration via quasi-Monte Carlo sampling with discretizations of low discrepancy. We prove by construction that DI-Nets universally approximate a large class of maps between integrable function spaces, and show that discretization invariance also describes backpropagation through such models. Applied to neural fields, convolutional DI-Nets can learn to classify and segment visual data under various discretizations, and sometimes generalize to new types of discretizations at test time. Code: https://github.com/clintonjwang/DI-net.

Despite Flow Matching and diffusion models having emerged as powerful generative paradigms for continuous variables such as images and videos, their application to high-dimensional discrete data, such as language, is still limited. In this work, we present Discrete Flow Matching, a novel discrete flow paradigm designed specifically for generating discrete data. Discrete Flow Matching offers several key contributions: (i) it works with a general family of probability paths interpolating between source and target distributions; (ii) it allows for a generic formula for sampling from these probability paths using learned posteriors such as the probability denoiser (x-prediction) and noise-prediction (epsilon-prediction); (iii) practically, focusing on specific probability paths defined with different schedulers considerably improves generative perplexity compared to previous discrete diffusion and flow models; and (iv) by scaling Discrete Flow Matching models up to 1.7B parameters, we reach 6.7% Pass@1 and 13.4% Pass@10 on HumanEval and 6.7% Pass@1 and 20.6% Pass@10 on 1-shot MBPP coding benchmarks. Our approach is capable of generating high-quality discrete data in a non-autoregressive fashion, significantly closing the gap between autoregressive models and discrete flow models.

Modeling the dynamics of deformable objects is challenging due to their diverse physical properties and the difficulty of estimating states from limited visual information. We address these challenges with a neural dynamics framework that combines object particles and spatial grids in a hybrid representation. Our particle-grid model captures global shape and motion information while predicting dense particle movements, enabling the modeling of objects with varied shapes and materials. Particles represent object shapes, while the spatial grid discretizes the 3D space to ensure spatial continuity and enhance learning efficiency. Coupled with Gaussian Splattings for visual rendering, our framework achieves a fully learning-based digital twin of deformable objects and generates 3D action-conditioned videos. Through experiments, we demonstrate that our model learns the dynamics of diverse objects -- such as ropes, cloths, stuffed animals, and paper bags -- from sparse-view RGB-D recordings of robot-object interactions, while also generalizing at the category level to unseen instances. Our approach outperforms state-of-the-art learning-based and physics-based simulators, particularly in scenarios with limited camera views. Furthermore, we showcase the utility of our learned models in model-based planning, enabling goal-conditioned object manipulation across a range of tasks. The project page is available at https://kywind.github.io/pgnd .

Generating high-quality meshes with complex structures and realistic surfaces is the primary goal of 3D generative models. Existing methods typically employ sequence data or deformable tetrahedral grids for mesh generation. However, sequence-based methods have difficulty producing complex structures with many faces due to memory limits. The deformable tetrahedral grid-based method MeshDiffusion fails to recover realistic surfaces due to the inherent ambiguity in deformable grids. We propose the GenUDC framework to address these challenges by leveraging the Unsigned Dual Contouring (UDC) as the mesh representation. UDC discretizes a mesh in a regular grid and divides it into the face and vertex parts, recovering both complex structures and fine details. As a result, the one-to-one mapping between UDC and mesh resolves the ambiguity problem. In addition, GenUDC adopts a two-stage, coarse-to-fine generative process for 3D mesh generation. It first generates the face part as a rough shape and then the vertex part to craft a detailed shape. Extensive evaluations demonstrate the superiority of UDC as a mesh representation and the favorable performance of GenUDC in mesh generation. The code and trained models are available at https://github.com/TrepangCat/GenUDC.

In NeRF, a critical problem is to effectively estimate the occupancy to guide empty-space skipping and point sampling. Grid-based methods work well for small-scale scenes. However, on large-scale scenes, they are limited by predefined bounding boxes, grid resolutions, and high memory usage for grid updates, and thus struggle to speed up training for large-scale, irregularly bounded and complex urban scenes without sacrificing accuracy. In this paper, we propose to learn a continuous and compact large-scale occupancy network, which can classify 3D points as occupied or unoccupied points. We train this occupancy network end-to-end together with the radiance field in a self-supervised manner by three designs. First, we propose a novel imbalanced occupancy loss to regularize the occupancy network. It makes the occupancy network effectively control the ratio of unoccupied and occupied points, motivated by the prior that most of 3D scene points are unoccupied. Second, we design an imbalanced architecture containing a large scene network and a small empty space network to separately encode occupied and unoccupied points classified by the occupancy network. This imbalanced structure can effectively model the imbalanced nature of occupied and unoccupied regions. Third, we design an explicit density loss to guide the occupancy network, making the density of unoccupied points smaller. As far as we know, we are the first to learn a continuous and compact occupancy of large-scale NeRF by a network. In our experiments, our occupancy network can quickly learn more compact, accurate and smooth occupancy compared to the occupancy grid. With our learned occupancy as guidance for empty space skipping on challenging large-scale benchmarks, our method consistently obtains higher accuracy compared to the occupancy grid, and our method can speed up state-of-the-art NeRF methods without sacrificing accuracy.

We introduce gridfm-datakit-v1, a Python library for generating realistic and diverse Power Flow (PF) and Optimal Power Flow (OPF) datasets for training Machine Learning (ML) solvers. Existing datasets and libraries face three main challenges: (1) lack of realistic stochastic load and topology perturbations, limiting scenario diversity; (2) PF datasets are restricted to OPF-feasible points, hindering generalization of ML solvers to cases that violate operating limits (e.g., branch overloads or voltage violations); and (3) OPF datasets use fixed generator cost functions, limiting generalization across varying costs. gridfm-datakit addresses these challenges by: (1) combining global load scaling from real-world profiles with localized noise and supporting arbitrary N-k topology perturbations to create diverse yet realistic datasets; (2) generating PF samples beyond operating limits; and (3) producing OPF data with varying generator costs. It also scales efficiently to large grids (up to 10,000 buses). Comparisons with OPFData, OPF-Learn, PGLearn, and PFΔ are provided. Available on GitHub at https://github.com/gridfm/gridfm-datakit under Apache 2.0 and via `pip install gridfm-datakit`.

We propose a new representation for encoding 3D shapes as neural fields. The representation is designed to be compatible with the transformer architecture and to benefit both shape reconstruction and shape generation. Existing works on neural fields are grid-based representations with latents defined on a regular grid. In contrast, we define latents on irregular grids, enabling our representation to be sparse and adaptive. In the context of shape reconstruction from point clouds, our shape representation built on irregular grids improves upon grid-based methods in terms of reconstruction accuracy. For shape generation, our representation promotes high-quality shape generation using auto-regressive probabilistic models. We show different applications that improve over the current state of the art. First, we show results for probabilistic shape reconstruction from a single higher resolution image. Second, we train a probabilistic model conditioned on very low resolution images. Third, we apply our model to category-conditioned generation. All probabilistic experiments confirm that we are able to generate detailed and high quality shapes to yield the new state of the art in generative 3D shape modeling.

Data-driven surrogate modeling has emerged as a powerful paradigm for accelerating computational fluid dynamics, and hierarchical U-shaped networks, which resemble the structure of classical Geometric Multigrid (GMG) methods, have become prevalent designs. Modern surrogates built on these designs achieve competitive accuracy at a fraction of the cost of numerical solvers; however, accurate prediction of complex flows remains challenging, and no existing architecture leads across them. In such networks, the multigrid analogy mainly concerns the multi-resolution topology, while their components largely follow common vision practice. To address this, this study introduces SUMNO, a multigrid neural operator for fluid flow fields on regular grids that spatially unrolls a V-cycle into a feed-forward U-shaped network. Parameter-free down- and upsampling stand in for restriction and prolongation, and additive skip connections for coarse-grid correction, with normalization-free transfer and skip pathways. Within this macro-architecture, convolutions are used at the fine and intermediate resolutions and shifted-window attention at the coarsest, whose window partitioning is generalized to handle periodicity independently per axis. Evaluated on unseen test configurations across four unsteady and steady flow benchmarks against five representative baselines, SUMNO is best in 5 of 7 settings and ranks second in the remaining two. It reduces the 10-step rollout MSE by about 30% relative to the strongest baseline, and outperforms three baselines with over 130 million parameters using 9.4 million parameters.

The creation of photorealistic virtual worlds requires the accurate modeling of 3D surface geometry for a wide range of objects. For this, meshes are appealing since they 1) enable fast physics-based rendering with realistic material and lighting, 2) support physical simulation, and 3) are memory-efficient for modern graphics pipelines. Recent work on reconstructing and statistically modeling 3D shape, however, has critiqued meshes as being topologically inflexible. To capture a wide range of object shapes, any 3D representation must be able to model solid, watertight, shapes as well as thin, open, surfaces. Recent work has focused on the former, and methods for reconstructing open surfaces do not support fast reconstruction with material and lighting or unconditional generative modelling. Inspired by the observation that open surfaces can be seen as islands floating on watertight surfaces, we parameterize open surfaces by defining a manifold signed distance field on watertight templates. With this parameterization, we further develop a grid-based and differentiable representation that parameterizes both watertight and non-watertight meshes of arbitrary topology. Our new representation, called Ghost-on-the-Shell (G-Shell), enables two important applications: differentiable rasterization-based reconstruction from multiview images and generative modelling of non-watertight meshes. We empirically demonstrate that G-Shell achieves state-of-the-art performance on non-watertight mesh reconstruction and generation tasks, while also performing effectively for watertight meshes.

Physical systems commonly exhibit spatially varying complexity, presenting a significant challenge for neural PDE solvers. While Graph Neural Networks can handle the irregular meshes required for complex geometries and boundary conditions, they still apply uniform computational effort across all nodes regardless of the underlying physics complexity. This leads to inefficient resource allocation where computationally simple regions receive the same treatment as complex phenomena. We address this challenge by introducing Adaptive Mesh Quantization: spatially adaptive quantization across mesh node, edge, and cluster features, dynamically adjusting the bit-width used by a quantized model. We propose an adaptive bit-width allocation strategy driven by a lightweight auxiliary model that identifies high-loss regions in the input mesh. This enables dynamic resource distribution in the main model, where regions of higher difficulty are allocated increased bit-width, optimizing computational resource utilization. We demonstrate our framework's effectiveness by integrating it with two state-of-the-art models, MP-PDE and GraphViT, to evaluate performance across multiple tasks: 2D Darcy flow, large-scale unsteady fluid dynamics in 2D, steady-state Navier-Stokes simulations in 3D, and a 2D hyper-elasticity problem. Our framework demonstrates consistent Pareto improvements over uniformly quantized baselines, yielding up to 50% improvements in performance at the same cost.

We present a novel deep learning framework for flow field predictions in irregular domains when the solution is a function of the geometry of either the domain or objects inside the domain. Grid vertices in a computational fluid dynamics (CFD) domain are viewed as point clouds and used as inputs to a neural network based on the PointNet architecture, which learns an end-to-end mapping between spatial positions and CFD quantities. Using our approach, (i) the network inherits desirable features of unstructured meshes (e.g., fine and coarse point spacing near the object surface and in the far field, respectively), which minimizes network training cost; (ii) object geometry is accurately represented through vertices located on object boundaries, which maintains boundary smoothness and allows the network to detect small changes between geometries; and (iii) no data interpolation is utilized for creating training data; thus accuracy of the CFD data is preserved. None of these features are achievable by extant methods based on projecting scattered CFD data into Cartesian grids and then using regular convolutional neural networks. Incompressible laminar steady flow past a cylinder with various shapes for its cross section is considered. The mass and momentum of predicted fields are conserved. We test the generalizability of our network by predicting the flow around multiple objects as well as an airfoil, even though only single objects and no airfoils are observed during training. The network predicts the flow fields hundreds of times faster than our conventional CFD solver, while maintaining excellent to reasonable accuracy.

How do multimodal models solve visual spatial tasks -- through genuine planning, or through brute-force search in token space? We introduce MazeBench, a benchmark of 110 procedurally generated maze images across nine controlled groups, and evaluate 16 model configurations from OpenAI, Anthropic, Google, and Alibaba. GPT-5.4 solves 91\% and Gemini 3.1 Pro 79\%, but these scores are misleading: models typically translate images into text grids and then enumerate paths step by step, consuming 1,710--22,818 tokens per solve for a task humans do quickly. Without added reasoning budgets, all configurations score only 2--12\%; on 20times20 ultra-hard mazes, they hit token limits and fail. Qualitative traces reveal a common two-stage strategy: image-to-grid translation followed by token-level search, effectively BFS in prose. A text-grid ablation shows Claude Sonnet 4.6 rising from 6\% on images to 80\% when given the correct grid, isolating weak visual extraction from downstream search. When explicitly instructed not to construct a grid or perform graph search, models still revert to the same enumeration strategy. MazeBench therefore shows that high accuracy on visual planning tasks does not imply human-like spatial understanding.

Inverse Stefan problem arising in modeling of laser ablation of biomedical tissues is analyzed, where information on the coefficients, heat flux on the fixed boundary, and density of heat sources are missing and must be found along with the temperature and free boundary. Optimal control framework is employed, where the missing data and the free boundary are components of the control vector, and optimality criteria are based on the final moment measurement of the temperature and position of the free boundary. Discretization by finite differences is pursued, and convergence of the discrete optimal control problems to the original problem is proven.

A classical problem in convex and discrete geometry asks for the convex polyhedron of greatest volume whose vertices are chosen from the unit sphere S^2. For a prescribed number N of vertices, the problem is known only in a small number of cases. In this paper we resolve the next outstanding case, N=9. We prove that every convex polyhedron with at most nine vertices on S^2 has volume at most 32sqrt{3-3}, with equality, up to rotation, precisely for a triaugmented triangular prism of an explicitly determined shape. The proof combines combinatorial and geometric reductions with sharp volume estimates. By a theorem of Berman and Hanes (Mathematische Annalen, 1970), a volume maximizer must be simplicial, reducing the 2,606 combinatorial types of 9-vertex polyhedra to 50. We prove that a maximizer cannot have a trivalent vertex, leaving only five combinatorial types, which are treated using geometric and combinatorial arguments. In particular, we determine the exact maximizer within the triaugmented triangular prism class, and characterize the equality case.

With growing attention to tabular data these days, the attempt to apply a synthetic table to various tasks has been expanded toward various scenarios. Owing to the recent advances in generative modeling, fake data generated by tabular data synthesis models become sophisticated and realistic. However, there still exists a difficulty in modeling discrete variables (columns) of tabular data. In this work, we propose to process continuous and discrete variables separately (but being conditioned on each other) by two diffusion models. The two diffusion models are co-evolved during training by reading conditions from each other. In order to further bind the diffusion models, moreover, we introduce a contrastive learning method with a negative sampling method. In our experiments with 11 real-world tabular datasets and 8 baseline methods, we prove the efficacy of the proposed method, called CoDi.

Recent advances in 3D X-ray Computed Tomographic (CT) sensors have stimulated research efforts to unveil the extremely complex micro-scale processes that control the activity of soil microorganisms. Voxel-based description (up to hundreds millions voxels) of the pore space can be extracted, from grey level 3D CT scanner images, by means of simple image processing tools. Classical methods for numerical simulation of biological dynamics using mesh of voxels, such as Lattice Boltzmann Model (LBM), are too much time consuming. Thus, the use of more compact and reliable geometrical representations of pore space can drastically decrease the computational cost of the simulations. Several recent works propose basic analytic volume primitives (e.g. spheres, generalized cylinders, ellipsoids) to define a piece-wise approximation of pore space for numerical simulation of draining, diffusion and microbial decomposition. Such approaches work well but the drawback is that it generates approximation errors. In the present work, we study another alternative where pore space is described by means of geometrically relevant connected subsets of voxels (regions) computed from the curvilinear skeleton. Indeed, many works use the curvilinear skeleton (3D medial axis) for analyzing and partitioning 3D shapes within various domains (medicine, material sciences, petroleum engineering, etc.) but only a few ones in soil sciences. Within the context of soil sciences, most studies dealing with 3D medial axis focus on the determination of pore throats. Here, we segment pore space using curvilinear skeleton in order to achieve numerical simulation of microbial decomposition (including diffusion processes). We validate simulation outputs by comparison with other methods using different pore space geometrical representations (balls, voxels).

We study the adaption of Soft Actor-Critic (SAC), which is considered as a state-of-the-art reinforcement learning (RL) algorithm, from continuous action space to discrete action space. We revisit vanilla discrete SAC and provide an in-depth understanding of its Q value underestimation and performance instability issues when applied to discrete settings. We thereby propose Stable Discrete SAC (SDSAC), an algorithm that leverages entropy-penalty and double average Q-learning with Q-clip to address these issues. Extensive experiments on typical benchmarks with discrete action space, including Atari games and a large-scale MOBA game, show the efficacy of our proposed method. Our code is at: https://github.com/coldsummerday/SD-SAC.git.

The conventional grid-based approach used for storing and evaluating ordinary parton distribution functions (PDFs), as implemented for example in LHAPDF, becomes much more demanding for double parton distributions (DPDs). While a collinear PDF depends on one longitudinal momentum fraction and one factorization scale, an unequal-scale DPD depends on two momentum fractions and two independent factorization scales for every parton-flavor combination. Direct tabulation of this four-dimensional dependence therefore requires considerably more disk space and runtime memory. In this work, we develop a hybrid neural-network method for compact storage and fast evaluation of y-independent unequal-scale DPDs. The network compresses the reference grid by reproducing most of its values, while the original values are stored only at points where the neural prediction does not reach the required accuracy. In this way, the neural model captures the bulk of the grid, with a sparse table covering the remaining difficult points. For the GS09-based dense grid studied here, only 0.694% of the active flavor values need to be stored in the sparse table. Compared with the compressed dense grid, the hybrid method reduces the disk footprint by a factor of 10.6, peak memory use by a factor of 31.6, and initialization time by about a factor of 10.6. At the same time, its evaluation throughput reaches about 85% of the dense-grid rate. The method is implemented natively in C++ within PDFxTMDLib and requires neither Python nor PyTorch at runtime. The hybrid scheme therefore offers much lower memory and startup costs, with only a modest reduction in evaluation speed.

Discrete diffusion models (DDMs) have shown powerful generation ability for discrete data modalities like text and molecules. However, their practical application is hindered by inefficient sampling, requiring a large number of sampling steps. Accelerating DDMs by using larger step sizes typically introduces significant problems in generation quality, as it amplifies the impact of both the compounding decoding error due to factorized predictions and discretization error from numerical approximations, leading to a significant decrease in sampling quality. To address these challenges, we propose learnable sampler distillation (LSD), a novel approach to train fast and high-fidelity samplers for DDMs. LSD employs a distillation approach where a student sampler with a few steps learns to align its intermediate score trajectory with that of a high-quality teacher sampler with numerous steps. This alignment is achieved by optimizing learnable sampler coefficients that adaptively adjust sampling dynamics. Additionally, we further propose LSD+, which also learns time schedules that allocate steps non-uniformly. Experiments across text generation, image generation, and synthetic tasks demonstrate that our proposed approaches outperform existing samplers for DDMs, achieving substantially higher sampling quality with significantly fewer sampling steps. Our code is available at https://github.com/feiyangfu/LSD{https://github.com/feiyangfu/LSD}.

Although polygon meshes have been a standard representation in geometry processing, their irregular and combinatorial nature hinders their suitability for learning-based applications. In this work, we introduce a novel learnable mesh representation through a set of local 3D sample Points and their associated Normals and Quadric error metrics (QEM) w.r.t. the underlying shape, which we denote PoNQ. A global mesh is directly derived from PoNQ by efficiently leveraging the knowledge of the local quadric errors. Besides marking the first use of QEM within a neural shape representation, our contribution guarantees both topological and geometrical properties by ensuring that a PoNQ mesh does not self-intersect and is always the boundary of a volume. Notably, our representation does not rely on a regular grid, is supervised directly by the target surface alone, and also handles open surfaces with boundaries and/or sharp features. We demonstrate the efficacy of PoNQ through a learning-based mesh prediction from SDF grids and show that our method surpasses recent state-of-the-art techniques in terms of both surface and edge-based metrics.

The recursive-line and signed Zarankiewicz numbers maximize the number of squares in augmentations of a maximum C_4-free base, subject to two sufficient irreducibility criteria. The count includes one square per base cell and one per selected pair of unused cells. We compare these parameters with the second-order number, which uses irreducibility itself. Every maximum mtimes n base admits a recursive-line augmentation with at least mn/2-Cmax(m,n) squares, for an absolute constant C. Combining this bound with a two-column extension of known fixed-width families, we show that all three parameters are asymptotically equivalent, uniformly as the larger dimension tends to infinity. For individual displays, a transfer graph shows that once the signed closure identifies every selected pair, the signed criterion is equivalent to irreducibility. We determine the second-order number for every six-column rectangle and give eventual exact formulas for all three numbers at widths seven, nine and eleven. We also prove signed and recursive-line equality at 8times7 and, together with earlier values, whenever the shorter side is at most six, except possibly at 14times4. The exact-value results are computer-assisted, using exhaustive enumeration, checked propositional refutations and symbolic certificates with a proved lifting argument for arbitrary lengths.

This work presents DAVINCI, a unified architecture for single-stage Computer-Aided Design (CAD) sketch parameterization and constraint inference directly from raster sketch images. By jointly learning both outputs, DAVINCI minimizes error accumulation and enhances the performance of constrained CAD sketch inference. Notably, DAVINCI achieves state-of-the-art results on the large-scale SketchGraphs dataset, demonstrating effectiveness on both precise and hand-drawn raster CAD sketches. To reduce DAVINCI's reliance on large-scale annotated datasets, we explore the efficacy of CAD sketch augmentations. We introduce Constraint-Preserving Transformations (CPTs), i.e. random permutations of the parametric primitives of a CAD sketch that preserve its constraints. This data augmentation strategy allows DAVINCI to achieve reasonable performance when trained with only 0.1% of the SketchGraphs dataset. Furthermore, this work contributes a new version of SketchGraphs, augmented with CPTs. The newly introduced CPTSketchGraphs dataset includes 80 million CPT-augmented sketches, thus providing a rich resource for future research in the CAD sketch domain.

Since Isaac Newton first studied the Kissing Number Problem in 1694, determining the maximal number of non-overlapping spheres around a central sphere has remained a fundamental challenge. This problem is the local analogue of Hilbert's 18th problem, bridging geometry, number theory, and information theory. Although significant progress has been made through lattices and codes, the irregularities of high-dimensional geometry, dimensional structure variability, and combinatorial explosion beyond Go limit the scalability and generality of existing methods. Here we model the problem as a two-player matrix completion game and train the reinforcement learning system, PackingStar, to play the games. The matrix entries represent pairwise cosines of sphere center vectors. One player fills entries while another corrects suboptimal ones to improve exploration quality, cooperatively maximizing the matrix size, corresponding to the kissing number. These matrices are decomposed into representative substructures, providing diverse bases and structural constraints that steer subsequent games and make extremely large spaces tractable. PackingStar surpasses records from dimensions 25 to 31 and sets new lower bounds for generalized kissing numbers under various angular constraints. It achieves the first breakthrough beyond rational structures from 1971 in 13 dimensions and discovers over 6000 new structures in other dimensions. Notably, some configurations challenge long-held antipodal paradigms, revealing algebraic correspondences with finite simple groups as well as geometric relationships across dimensions. Inspired by these patterns, humans devised further improved constructions. These results demonstrate AI's power to explore high-dimensional spaces beyond human intuition via extreme-scale reinforcement learning and open new pathways for the Kissing Number Problem and broader geometry research.

Finite unions of convex sets are a central object of study in discrete and computational geometry. In this paper we initiate a systematic study of complements of such unions -- i.e., sets of the form S=R^d setminus (cup_{i=1}^n K_i), where K_i are convex sets. In the first part of the paper we study isolated points in S, whose number is related to the Betti numbers of cup_{i=1}^n K_i and to its non-convexity properties. We obtain upper bounds on the number of such points, which are sharp for n=3 and significantly improve previous bounds of Lawrence and Morris (2009) for all n ll 2^d{d}. In the second part of the paper we study coverings of S by well-behaved sets. We show that S can be covered by at most g(d,n) flats of different dimensions, in such a way that each x in S is covered by a flat whose dimension equals the `local dimension' of S in the neighborhood of x. Furthermore, we determine the structure of a minimum cover that satisfies this property. Then, we study quantitative aspects of this minimum cover and obtain sharp upper bounds on its size in various settings.

Discrete denoising diffusion models (DDMs) have recently emerged as a compelling alternative to autoregressive (AR) modeling for discrete data, offering parallel generation and iterative global refinement capabilities. Unlike continuous diffusion, where the state space is fixed, DDMs are fundamentally shaped by how the discrete state space is constructed: the tokenization scheme, the vocabulary topology, and domain-specific structural alphabets. This work introduces a unified conceptual framework that views discrete diffusion models through the construction of the underlying discrete state space. Within this framework, existing formulations, including transition-matrix, masking/absorbing-state, and score/ratio-based approaches, emerge as different instantiations of a common design space. The framework further exposes common design trade-offs across training objectives, inference algorithms, scaling behavior, systems optimization, and evaluation protocols, suggesting several promising directions for future research.

Training competitive deep video models is an order of magnitude slower than training their counterpart image models. Slow training causes long research cycles, which hinders progress in video understanding research. Following standard practice for training image models, video model training assumes a fixed mini-batch shape: a specific number of clips, frames, and spatial size. However, what is the optimal shape? High resolution models perform well, but train slowly. Low resolution models train faster, but they are inaccurate. Inspired by multigrid methods in numerical optimization, we propose to use variable mini-batch shapes with different spatial-temporal resolutions that are varied according to a schedule. The different shapes arise from resampling the training data on multiple sampling grids. Training is accelerated by scaling up the mini-batch size and learning rate when shrinking the other dimensions. We empirically demonstrate a general and robust grid schedule that yields a significant out-of-the-box training speedup without a loss in accuracy for different models (I3D, non-local, SlowFast), datasets (Kinetics, Something-Something, Charades), and training settings (with and without pre-training, 128 GPUs or 1 GPU). As an illustrative example, the proposed multigrid method trains a ResNet-50 SlowFast network 4.5x faster (wall-clock time, same hardware) while also improving accuracy (+0.8% absolute) on Kinetics-400 compared to the baseline training method. Code is available online.

Generating visual layouts is an essential ingredient of graphic design. The ability to condition layout generation on a partial subset of component attributes is critical to real-world applications that involve user interaction. Recently, diffusion models have demonstrated high-quality generative performances in various domains. However, it is unclear how to apply diffusion models to the natural representation of layouts which consists of a mix of discrete (class) and continuous (location, size) attributes. To address the conditioning layout generation problem, we introduce DLT, a joint discrete-continuous diffusion model. DLT is a transformer-based model which has a flexible conditioning mechanism that allows for conditioning on any given subset of all the layout component classes, locations, and sizes. Our method outperforms state-of-the-art generative models on various layout generation datasets with respect to different metrics and conditioning settings. Additionally, we validate the effectiveness of our proposed conditioning mechanism and the joint continuous-diffusion process. This joint process can be incorporated into a wide range of mixed discrete-continuous generative tasks.

Lattice-based planning techniques simplify the motion planning problem for autonomous vehicles by limiting available motions to a pre-computed set of primitives. These primitives are then combined online to generate more complex maneuvers. A set of motion primitives t-span a lattice if, given a real number t at least 1, any configuration in the lattice can be reached via a sequence of motion primitives whose cost is no more than a factor of t from optimal. Computing a minimal t-spanning set balances a trade-off between computed motion quality and motion planning performance. In this work, we formulate this problem for an arbitrary lattice as a mixed integer linear program. We also propose an A*-based algorithm to solve the motion planning problem using these primitives. Finally, we present an algorithm that removes the excessive oscillations from planned motions -- a common problem in lattice-based planning. Our method is validated for autonomous driving in both parking lot and highway scenarios.

Transmittance estimators such as Occupancy Grid (OG) can accelerate the training and rendering of Neural Radiance Field (NeRF) by predicting important samples that contributes much to the generated image. However, OG manages occupied regions in the form of the dense binary grid, in which there are many blocks with the same values that cause redundant examination of voxels' emptiness in ray-tracing. In our work, we introduce two techniques to improve the efficiency of ray-tracing in trained OG without fine-tuning. First, we replace the dense grids with VDB grids to reduce the spatial redundancy. Second, we use hierarchical digital differential analyzer (HDDA) to efficiently trace voxels in the VDB grids. Our experiments on NeRF-Synthetic and Mip-NeRF 360 datasets show that our proposed method successfully accelerates rendering NeRF-Synthetic dataset by 12% in average and Mip-NeRF 360 dataset by 4% in average, compared to a fast implementation of OG, NerfAcc, without losing the quality of rendered images.

Most competitive 4-bit LLM research pipelines now open the same way: apply a linear, function-preserving transform (rotation, scaling, permutation, non-orthogonal affine) so the outlier mass sits more favorably against the group scales, and only then round. Yet we are aware of no survey dedicated to this transform stage, and its literature is quietly re-deriving an older theory. We identify and formalize the principle that organizes it, the Great Inversion: allocation-flexible coding rewards energy concentration, whereas the grouped shared-scale quantization a deployed matrix instruction performs rewards within-group flattening. Classical transform coding (1963: decorrelate, allocate bits, quantize) spends different bits per coordinate at a fixed total rate; for a Gaussian source at high rate the Karhunen-Loeve transform's concentration minimizes distortion. A deployed operand tile instead carries one absolute-maximum scale per group and equal bits everywhere, with no allocation; on a uniform grid that objective rewards flattening, approached by Hadamard incoherence. We prove that opposition under within-group majorization: the prescriptions point in opposite directions, each backed by a proof against its own objective, and for a generic spectrum no optimality guarantee transfers. A second axis is the number format: the non-uniform FP4 grid makes flattening buy less, MXFP4's power-of-two block scale still rewards a rotation confined to that block, and NVFP4's mantissa-carrying scale largely removes that pull, so the target pole depends jointly on allocation regime and format. We survey 200 works to a June 2026 cutoff; classify 43 transform methods by structure, data-awareness, searched-versus-constructed, and runtime cost; record, where reported, how they compose with GPTQ rounding; distill a first-choice guide by deployment regime; and close with the open problems it exposes.

Generative modeling of discrete data, such as graphs, underpins many scientific and industrial applications, including molecular discovery and materials design. In these domains, probabilistic inference is particularly valuable, as it enables composable generation and principled incorporation of desired constraints, such as structural or functional properties. Energy-based models naturally support this goal by capturing relative likelihoods and enabling composable inference by directly enforcing constraints during inference. However, discrete energy-based models typically struggle with efficient and high-quality sampling, as off-support regions often contain spurious local minima, trapping samplers and causing training instabilities, resulting in a fidelity gap compared to discrete diffusion models. To address this gap, we introduce Graph Energy Matching (GEM), a discrete generative framework inspired by the Jordan-Kinderlehrer-Otto (JKO) transport-map optimization perspective. GEM learns a permutation-invariant potential energy that simultaneously guides discrete transport from noise toward high-likelihood graph regions and refines samples within these regions. We further introduce a sampling protocol leveraging an energy-based switching strategy, seamlessly bridging rapid, gradient-guided transport and a local mixing regime for effective exploration. On molecular graph benchmarks, GEM matches or surpasses strong discrete diffusion baselines on most reported metrics. Beyond improving generation quality, GEM's relative likelihood modeling enables targeted exploration, facilitating compositional generation, property-constrained sampling, and interpolation between graphs. Project page: https://michalbalcerak.ai/graph-energy-matching/.

Generating long-form multi-shot videos requires coherent within-shot motion and visually consistent narratives across shots. Existing video generators favor continuous motion and struggle to present complete shot sets when an entire narrative is packed along one temporal axis. We propose MovieGrid, a Multi-Grid Post-Training paradigm that decomposes a long video into shorter, temporally ordered chunks and arranges them on a spatial grid for joint modeling. This design reduces the number of shots handled by each temporal axis while enabling global information exchange across chunks. We construct the Multi-Grid Long Video (MGLV) dataset from 1,000 long-form videos using source video collection, hierarchical segmentation, grid video construction, and character-aware story annotation, producing 54K grid videos paired with story prompts. Our Noise-Free Random-Grid Training retains a random subset of chunks as clean visual context for denoising the remaining chunks. Grid Embedding encodes grid structure, character-aware Story Prompts link recurring entities, and Grid Boundary Loss stabilizes layouts. Under the same token budget, MovieGrid generates 6.05 times more shots than Temporal Packing in a 1,616-frame video. On a benchmark spanning five real-world categories, it achieves state-of-the-art intra-shot consistency (0.9131 versus 0.8086 for HoloCine) and inter-shot consistency (0.5914 versus 0.5384 for StoryMem). MovieGrid can further scale video length with minimal compromise through single or multiple generations.

Unveiling feeder topologies from data is of paramount importance to advance situational awareness and proper utilization of smart resources in power distribution grids. This tutorial summarizes, contrasts, and establishes useful links between recent works on topology identification and detection schemes that have been proposed for power distribution grids. The primary focus is to highlight methods that overcome the limited availability of measurement devices in distribution grids, while enhancing topology estimates using conservation laws of power-flow physics and structural properties of feeders. Grid data from phasor measurement units or smart meters can be collected either passively in the traditional way, or actively, upon actuating grid resources and measuring the feeder's voltage response. Analytical claims on feeder identifiability and detectability are reviewed under disparate meter placement scenarios. Such topology learning claims can be attained exactly or approximately so via algorithmic solutions with various levels of computational complexity, ranging from least-squares fits to convex optimization problems, and from polynomial-time searches over graphs to mixed-integer programs. Although the emphasis is on radial single-phase feeders, extensions to meshed and/or multiphase circuits are sometimes possible and discussed. This tutorial aspires to provide researchers and engineers with knowledge of the current state-of-the-art in tractable distribution grid learning and insights into future directions of work.

Modeling the probability distribution of rows in tabular data and generating realistic synthetic data is a non-trivial task. Tabular data usually contains a mix of discrete and continuous columns. Continuous columns may have multiple modes whereas discrete columns are sometimes imbalanced making the modeling difficult. Existing statistical and deep neural network models fail to properly model this type of data. We design TGAN, which uses a conditional generative adversarial network to address these challenges. To aid in a fair and thorough comparison, we design a benchmark with 7 simulated and 8 real datasets and several Bayesian network baselines. TGAN outperforms Bayesian methods on most of the real datasets whereas other deep learning methods could not.

Semiparametric discrete choice models are widely used in a variety of practical applications. While these models are point identified in the presence of continuous covariates, they can become partially identified when covariates are discrete. In this paper we find that classical estimators, including the maximum score estimator, (Manski (1975)), loose their attractive statistical properties without point identification. First of all, they are not sharp with the estimator converging to an outer region of the identified set, (Komarova (2013)), and in many discrete designs it weakly converges to a random set. Second, they are not robust, with their distribution limit discontinuously changing with respect to the parameters of the model. We propose a novel class of estimators based on the concept of a quantile of a random set, which we show to be both sharp and robust. We demonstrate that our approach extends from cross-sectional settings to classical static and dynamic discrete panel data models.

Cellular automata (CAs) are fully-discrete dynamical models that have received much attention due to the fact that their relatively simple setup can nonetheless express highly complex phenomena. Despite the model's theoretical maturity and abundant computational power, the current lack of a complete survey on the 'taxonomy' of various families of CAs impedes efficient and interdisciplinary progress. This review paper mitigates that deficiency; it provides a methodical overview of five important CA 'families': asynchronous, stochastic, multi-state, extended-neighbourhood, and non-uniform CAs. These five CA families are subsequently presented from four angles. First, a rigorous mathematical definition is given. Second, we map prominent variations within each CA family, as such highlighting mathematical equivalences with types from other families. Third, we discuss the genotype and phenotype of these CA types by means of mathematical tools, indicating when established tools break down. Fourth, we conclude each section with a brief overview of applications related to information theory and mathematical modelling.

Following the success of the in-context learning paradigm in large-scale language and computer vision models, the recently emerging field of in-context reinforcement learning is experiencing a rapid growth. However, its development has been held back by the lack of challenging benchmarks, as all the experiments have been carried out in simple environments and on small-scale datasets. We present XLand-100B, a large-scale dataset for in-context reinforcement learning based on the XLand-MiniGrid environment, as a first step to alleviate this problem. It contains complete learning histories for nearly 30,000 different tasks, covering 100B transitions and 2.5B episodes. It took 50,000 GPU hours to collect the dataset, which is beyond the reach of most academic labs. Along with the dataset, we provide the utilities to reproduce or expand it even further. With this substantial effort, we aim to democratize research in the rapidly growing field of in-context reinforcement learning and provide a solid foundation for further scaling. The code is open-source and available under Apache 2.0 licence at https://github.com/dunno-lab/xland-minigrid-datasets.